Technical Flashing oil light 1.3 multijet doblo

[Xt660wolfman]

Hi

Do any of you guys have the software/machine to reset a flashing oil light on my Doblo

I checked handbook and Changed oil and Filter and Fiat dealer wanted £45 +vat to turn the light off
Any of you guys around the Colchester area can do it at all

Cheers
Steve

 

[shaggy1970]

2012 - forward... Fiat doblo... Vauxhall combo etc

Reset oil light after service... that is very important. And don't skip the oil change either.

1-turn on the ignition key,
2-press the gas pedal and hold it,
3-press the brake pedal 7 times without relesing the gas pedal,
4-keep pressing the gas pedal for 60sec.
5-Release the gas pedal and turn of the ignition key,
6- Wait for 60sec.
Then turn on the ignition key and start the engine. Check if the service/oil change light turned off.
That's all! The vehicle is Fiat Doblo, works on Linea, Qubo/fiorino also vauxhall combo.

 

[mister G]

You only can reset the oil light if your dublo had a d p f seustem

 

[turbozed]

2012 - forward... Fiat doblo... Vauxhall combo etc

Reset oil light after service... that is very important. And don't skip the oil change either.

1-turn on the ignition key,
2-press the gas pedal and hold it,
3-press the brake pedal 7 times without relesing the gas pedal,
4-keep pressing the gas pedal for 60sec.
5-Release the gas pedal and turn of the ignition key,
6- Wait for 60sec.
Then turn on the ignition key and start the engine. Check if the service/oil change light turned off.
That's all! The vehicle is Fiat Doblo, works on Linea, Qubo/fiorino also vauxhall combo.

I observed on my 2014 Doblo that when you start the engine at the end, the oil light will flash 3 times indicating that it has successfully reset the counter. Obviously only do this procedure if you have just serviced the car otherwise everything will get confused.