General Indicators not working inside vehicle 2010 Panda

[Zongalero]

Hi
Could anyone help with a simple solution before I take it to the garage.

Both sides of the external Indicators and the hazard warning lights work externally.


Inside the vehicle they dont appear to be showing on the instrument panel (Left and Right).,..but the hazard warning light in the vehicle still works.


My manual doesnt show me what number the fuse is for the indicators so I cant check that..this may be a common problem with the Panda.

Tia

 

[koalar]

The dash indicator is an LED soldered onto the PCB

When you press the hazards are the two green arrows also coming on the dash

 

[Zongalero]

The dash indicator is an LED soldered onto the PCB

When you press the hazards are the two green arrows also coming on the dash

Thanks for the swift response.No the big red one(switch) is still flashing inside but not the two green arrows.I have only just purchased the car...I noted that the left turn dashboard indicator wasnt working....now its both of the that arent working...there is also no clicking noise either....but all of the outside indicators are bang on??

 

[A3jeroen]

All these signals (lights and clicks) come from the BodyComputer.

gr J

 

[Zongalero]

All these signals (lights and clicks) come from the BodyComputer.

gr J

Ok Thank you.....everything else is working lights and noises wise...strange is just the indicators ??

 

[koalar]

There is no click unless you put you head near the accelerator pedal

You really need some bidirectional software to switch the dash LEDS on and off on to make sure that the dash working

We have had weird things happen with a dodgy chassis earth here

2009 Panda Flashing ABS & Steering when indicating | FIAT Panda (Mk3)

Realise this is a pretty common thing, I have checked all the power/earth leads, battery has also been replaced. When indicating, the ABS then Steering Symbol come on one after the other, then go out again. These stay off unless indicating...so I know it is an issue either inside the instrument...

www.fiatforum.com

Also weird things happen if you fit the wrong type of bulbs, check someone hasn't fitted LED bulbs instead of the original incandescent

 

[Zongalero]

There is no click unless you put you head near the accelerator pedal

You really need some bidirectional software to switch the dash LEDS on and off on to make sure that the dash working

We have had weird things happen with a dodgy chassis earth here

2009 Panda Flashing ABS & Steering when indicating | FIAT Panda (Mk3)

Realise this is a pretty common thing, I have checked all the power/earth leads, battery has also been replaced. When indicating, the ABS then Steering Symbol come on one after the other, then go out again. These stay off unless indicating...so I know it is an issue either inside the instrument...

www.fiatforum.com

Also weird things happen if you fit the wrong type of bulbs, check someone hasn't fitted LED bulbs instead of the original incandescent

I had the rear cluster off yesterday to check it wasnt the bulbs...they were fine.

Its not coming up as a fault on my reader......Thanks for the suggestion.There are no warning lights coming up.....and other parts of the dashboard are fine??

 

[koalar]

I had the rear cluster off yesterday to check it wasnt the bulbs...they were fine.

Its not coming up as a fault on my reader......Thanks for the suggestion.There are no warning lights coming up.....and other parts of the dashboard are fine??

They have to be the right type of bulbs

Some LED bulbs will not draw enough current to be detected by the body computer correctly, they need to the right wattage filament bulbs to be sure it will work, after that it's possible to play with alternatives, some work some don't

Can you read the body computer with you reader or does it read the engine module only

 

[Zongalero]

I had the rear cluster off yesterday to check it wasnt the bulbs...they were fine.

Its not coming up as a fault on my reader......Thanks for the suggestion.There are no warning lights coming up.....and other parts of the dashboard are fine??

I will check today...it would be great if that was the only problem