Technical Ducato 2015 Comfortmatic actuator reset needed - Looking for help/advice please

[sunbeam1958]

Hi,

I have recently replaced the clutch on my 2015 2.3 Ducato Comfortmatic Multijet. I managed, with difficulty, to do this without having to remove the engine.

I now need the clutch to be calibrated and actuator to reset, but unfortunately I can't take it anywhere so would need a home visit.

Does anyone out there know of anyone with the correct software who is mobile. I am based in Peterborough/Cambridge area.

Any advice or information would be much appreciated.

 

[sunbeam1958]

An update regarding Multiecuscan. I bought a copy of Fiat Ecumultiscan and am now back on the road for the past couple of weeks. Everything appears to working as it should be.

This may be of interest to other forum members as I did the clutch replacement for the price of a new clutch. Not forgetting I obviously paid for the software, but I have that for future use.

 

[growlybear]

An update regarding Multiecuscan. I bought a copy of Fiat Ecumultiscan and am now back on the road for the past couple of weeks. Everything appears to working as it should be.

This may be of interest to other forum members as I did the clutch replacement for the price of a new clutch. Not forgetting I obviously paid for the software, but I have that for future use.

Fantastic result. Well done!

 

[CaptBoogie]

An update regarding Multiecuscan. I bought a copy of Fiat Ecumultiscan and am now back on the road for the past couple of weeks. Everything appears to working as it should be.

This may be of interest to other forum members as I did the clutch replacement for the price of a new clutch. Not forgetting I obviously paid for the software, but I have that for future use.

I am having a similar problem with a 2018 Ducato 2.3 motorhome at 26,000 miles. I am in the PE15 area. Are you a workshop? I am looking to get repairs done. Fault codes P0613-42, P0715-31, P0715-62, P060A-79, P2912-98. From start up, the vehicle changes gears as it should. After a few miles or even up to 100+ miles the Check Transmission light appears on the dashboard. When this appears the cruise control stops working and it will not change gear while the light is on, usually for only a few seconds. As soon as the light disappears the gears change as they should. If I am in heavy, slow traffic driving slow through gears 1,2, & 3 the Check Gearbox light appears more frequently. If I am driving on the open road the warning light appears less frequently. It always reverts to okay gear changes when the Check Gearbox light is off but the cruise control does not resume. If I stop the engine and switch off the ignition, pause for a couple of minutes, and start the engine it seems to reset and the cruise control will work again until the Check Gearbox light reappears. Any advice or suggestions would be much appreciated.

 

[MSjoberg]

See link below for error codes related to Comfortmatic for X290. From your list of codes my guess is that it seems to be some electrical problem rather than mechanical.

https://lab-aftersales.fiat.com/elearn_testreda/main.aspx?nodeID=250021613&languageID=2&markID=5&modelID=250000003&valID=250000009&prodID=99&modelName=Professional%20-%20290/295%20-%20Ducato%20FL%202014&langDesc=English&sectionName=Diagnosi%20per%20DTC&validityName=2.3%20JTD%20E6&isExaminer=

 

[sunbeam1958]

I am having a similar problem with a 2018 Ducato 2.3 motorhome at 26,000 miles. I am in the PE15 area. Are you a workshop? I am looking to get repairs done. Fault codes P0613-42, P0715-31, P0715-62, P060A-79, P2912-98. From start up, the vehicle changes gears as it should. After a few miles or even up to 100+ miles the Check Transmission light appears on the dashboard. When this appears the cruise control stops working and it will not change gear while the light is on, usually for only a few seconds. As soon as the light disappears the gears change as they should. If I am in heavy, slow traffic driving slow through gears 1,2, & 3 the Check Gearbox light appears more frequently. If I am driving on the open road the warning light appears less frequently. It always reverts to okay gear changes when the Check Gearbox light is off but the cruise control does not resume. If I stop the engine and switch off the ignition, pause for a couple of minutes, and start the engine it seems to reset and the cruise control will work again until the Check Gearbox light reappears. Any advice or suggestions would be much appreciated.

I'm not a workshop.

The main problem with these Comfortmatics is, there aren't many people out there who know enough about them. I think it would be well worth investing in the Fiat Ecumultiscan software for a start. Sorry I can't be more helpful.