General Door lock nuts

[Markjb]

I’ve Googled as much as I can and hope someone can help.

I fitted a metal door plate to the drivers door and I’ve lost one of the nuts (there are three of them).

I’m trying to find a replacement but can’t find them anywhere - can anyone help?

I left the one accessible via the grommet to save me having to strip the door down again!

Thanks in advance

 

[Communicator]

Is anything special about the nuts? Have you tried a search on Ebay for nuts of the correct diameter? Probably 5mm or 6mm, so M5 or M6. Standard M6 thread pitch is 1.0mm, while M5 has an 0.80mm pitch.

 

[Markjb]

Thanks for the reply. That’s the problem, I don’t know what the size is now I’ve put the door back together and wondered if anyone had access to a parts list.

I used a 10mm socket to take off / put back on - that’s all I know.

Would that fit with either a M5 or M6 nut do you know?

Thanks again

 

[Markjb]

It looks like it could be M6 - thanks for your help

 

[Communicator]

It looks like it could be M6 - thanks for your help

I should have mentioned that M6 nuts take a 10mm spanner. If you search on eBay for M6 nuts, you should be offered a large selection, and be able to purchase small quantities.