sunbeam1958
Member
- Joined
- Aug 7, 2014
- Messages
- 12
- Points
- 56
I'm hoping that someone can throw some light on my problem.
I recently fitted a reconditioned engine to 2015 Doblo. When I turned on the ignition the dashboard lit up, fuel pressurised and all looked fine, but as I went to turn the engine over immediately all the lights went out. Now everything is dead.
I have checked all the fuses, reconnected the battery several times, checked earth all showing 12.5v. There is no power to the ignition connectors.
I checked out the starter motor and did notice that the solenoid lead to the the starter was touching earth, so I'm thinking that something blew when I went to turn over the van.
All the lights,indicators, horn etc are working. I think I'm missing something and am hoping someone else may have some ideas as to how I can resolve this.
I recently fitted a reconditioned engine to 2015 Doblo. When I turned on the ignition the dashboard lit up, fuel pressurised and all looked fine, but as I went to turn the engine over immediately all the lights went out. Now everything is dead.
I have checked all the fuses, reconnected the battery several times, checked earth all showing 12.5v. There is no power to the ignition connectors.
I checked out the starter motor and did notice that the solenoid lead to the the starter was touching earth, so I'm thinking that something blew when I went to turn over the van.
All the lights,indicators, horn etc are working. I think I'm missing something and am hoping someone else may have some ideas as to how I can resolve this.
