General Could you help me in identifying the exact model , size and specification of my new Ducato
Currently reading:
General Could you help me in identifying the exact model , size and specification of my new Ducato
Hello,
The VIN is too new to be recognised by the forum ePER (spare parts catalogue) and ilcats.ru. Catcar.info doesn't even have the FIAT catalogue.
Looking at the 1st photo, I can see the following:
1st line below VIN is GVM: 4005 kg
2nd line below VIN is GCWR: 6505 kg
According to the internet:
Motore is the engine: F1AE3481D is a 2,3 liter Euro 5 engine with 96 kW / 131 HP.
The model line confirms it's a 4 ton GVM Ducato with the a.m. engine. It was produced since 2011. But of course had several liftings in the meantime.
Looking at the van photo I assume it's a L3H2 body.
The model has a FIAT codename x290.
The VIN is too new to be recognised by the forum ePER (spare parts catalogue) and ilcats.ru. Catcar.info doesn't even have the FIAT catalogue.
Looking at the 1st photo, I can see the following:
1st line below VIN is GVM: 4005 kg
2nd line below VIN is GCWR: 6505 kg
According to the internet:
Motore is the engine: F1AE3481D is a 2,3 liter Euro 5 engine with 96 kW / 131 HP.
The model line confirms it's a 4 ton GVM Ducato with the a.m. engine. It was produced since 2011. But of course had several liftings in the meantime.
Looking at the van photo I assume it's a L3H2 body.
The model has a FIAT codename x290.
Last edited:
- Joined
- Nov 3, 2014
- Messages
- 890
- Points
- 312
Hi
For starters, the engine code indicates a Fiat 2.3 Multijet II Euro 5 emissions spec engine as used from about 2010 to 2015. Capacity 2287 cc, 130 PS power, 320 Nm torque.
The masses on the plate are 4005 kg Gross Vehicle Weight, 6505 kg Maximum Train Weight (i.e. with a trailer), 2100 kg Maximum Frint Axle Weight, 2400 kG Maximum Rear Axle Weight. This indicates that it is one of the Maxi series of weight variants.
Judging from the photo, the body size looks like Length 3, Height 2 (L3H2). If so, the wheelbase is 4305 mm, the length is 5998 mm and the height is 2522 mm. A tape measure will soon reveal.
For starters, the engine code indicates a Fiat 2.3 Multijet II Euro 5 emissions spec engine as used from about 2010 to 2015. Capacity 2287 cc, 130 PS power, 320 Nm torque.
The masses on the plate are 4005 kg Gross Vehicle Weight, 6505 kg Maximum Train Weight (i.e. with a trailer), 2100 kg Maximum Frint Axle Weight, 2400 kG Maximum Rear Axle Weight. This indicates that it is one of the Maxi series of weight variants.
Judging from the photo, the body size looks like Length 3, Height 2 (L3H2). If so, the wheelbase is 4305 mm, the length is 5998 mm and the height is 2522 mm. A tape measure will soon reveal.
That sums up to 3500 kg, not 4000
but I'm not sure if it should sum up to GVM.
I've just uploaded the technical specifications sheet for the European x290. It shall be available in some time. You'll have all the specs:
www.fiatforum.com
Fiat Ducato x290 Goods Technical Specifications Sheet November 2014 (ENG)
Fiat Ducato x290 Goods Technical Specifications Sheet November 2014 (ENG)
www.fiatforum.com
Last edited:
and i am very happy for your help ,
I thought that an alpha in the vin i.e. P indicates it is a multijet 2 so is euro 6?
The euro5 is based on the engine model from the van's identification plate.
I suppose that what you're saying could be true for the EU / UK / CH market, that it should be the MultiJet 2 euro6 engine, but as the OP's van doesn't have the euro homologation number on the identification plate, it is definitely a model for a non-EU market, which could have the older euro5 engine only.
Similar threads
