Technical 1.9 td will not start.

Currently reading:
Technical 1.9 td will not start.

I am wondering whether something like this could be made to fit?
 
This post contains affiliate links which may earn a commission at no additional cost to you.
Possibly but the bulb type primers are better (-;
Hi, Thank you so much for your help. As you said, I put a bulb in line with the fuel feed to the filter, and after pumping it a good few time I got diesel. I started and run for a few seconds after a few mor pumps and a few more starts, it started and is running again. So thank you for your time and your help, I feel I have learnt a lot.
 

Attachments

  • fuel bulb.jpg
    fuel bulb.jpg
    452.4 KB · Views: 41
Yes you have learned and done very well(-:

Now get the cam belt kit and water pump replaced before either fail causing catastrophic irreparable engine failure- irreparable because many parts are no longer available new or used and that engine complete used is more rare than unicorn........

Don't leave that clear tube on it is not suitable for fuel
 
Back
Top