Cinquecento SPI throttle body -- where the pipes go

custard · May 15, 2008

image edited,only attached images in the guides section

mozzy · May 16, 2008

hi, the brown and black ended pipes from throttle body, where do they go on the air filter thermostat. looking into the engine is the brown connector to the left or right connection? info would be appreciated

monicaca · Nov 29, 2008

Great to know. Anyone has a wiring diagram of a FIAT cinquecento from 1996? I know it's a bit old, but that's why i need the diagram!!! Thanks very much

Trev59 · Mar 18, 2010

Where does Number 14 go to? mine is missing and pouring water out

busta · Apr 21, 2010

On my 2000 Sei pipe 14 is a rerturn to the top of the header tank. Now going to check where 7 comes from.

markja · Dec 9, 2010

on my cinq sporting the pipe to the maf comes off the inlet manifold with the brake servo vacuum. number ten on the diagram goes to the airbox. is this ok? also the likkle valve in the airbox sort of sqeaks when engine is running???? should it?
cheers folks.

RuiG · Feb 25, 2011

My Cento has nº10 blocked on the TB. rallycinq told me some cars are this way from factory. So where does it read that info and how is the engine managment different from the ones that have that connection? If I'm right, nº10 goes from the tb to the airbox, right?

cinq7540 · May 13, 2011

is it OK to block 10.

The wateer feed from header tan, have read this can not be block??(can not find post now!) can this be joined with the outlet to create a loop. This is something that concerns me as live England so dose not get very cold in the winter, we all know its about cold air so really would like to not be running this warm water through TB system. Have posted on forum but no answer, would really appreciate some help on this one. Also is there this sort of system on manifold and if so can this be bypassed.

fingers99 · Jan 22, 2012

10 can't be blocked off (unless you have a MAP pipe from the inlet manifold itself). I'm pretty sure 9 can.

TakeTheMikey · Feb 5, 2012

Does no. 9 have to be connected?? e.g. If I were to replace the air box with a cone air filter and therefore remove the breather pipe??

FuzzyLoveSpud · Dec 9, 2012

Can I make 10 go back onto the MAP Sensor and block off the one on the Manifold? Or should I just block off 10 and leave the MAP connected to the manifold?

blu73 · Dec 11, 2012

either or will do. most cento ones don't have the pipe there for the map sensor though so have a look at yours, the Punto60 TB's do have that pipe though and will bolt straight on.

Silencer · Sep 17, 2016

If i dont block the 9 the car works in 1500-1600rpm any ideas?

Cinquecento SPI throttle body -- where the pipes go

custard

Status: DEFCON Grumpy

mozzy

New member

monicaca

New member

Trev59

New member

busta

New member

markja

New member

RuiG

Member

cinq7540

New member

fingers99

Patron member

TakeTheMikey

New member

FuzzyLoveSpud

New member

blu73

Hold my beer.

Silencer

New member

Similar threads