- Joined
- Apr 8, 2008
- Messages
- 16,742
- Points
- 3,186
I have used 2 old linkages to make one decent one, measure cut and pop rivet together (as it's U shaped you can expand one rod and put the other inside and rivet together) get a new rod with 2 good ends!
In thoery - if your good at doing stuff - you could turn on a lathe a new set of Ball joints - and weld the the new joints into place
Keeping the original bushing on the linkages and hey presto - Tight and good working linkages
Tbh the bushing in mine are also going (So where the spindle joins the wipers arm)
has like 3mm play from side to side
So very very juddery wipers from time to time
Ziggy