Technical Sticking in gear

Currently reading:
Technical Sticking in gear

forzaf1

Member
Joined
Jun 30, 2004
Messages
141
Points
105
Location
Hampshire, United Kingdom
I have a 500 that is sticking in and sometimes out of gear.

I found getting into 1st and 5th to be difficult, so made the adjustment to the linkage under the battery tray which helped alot.

It appears that the only way to free it up and get it out of gear is to turn the car off.

Any ideas??

Thank you
 
The clutch is probably worn out. You need to replace it, if it is. Also, first check the clutch's master and slave cylinders, as that could be the cause and is a lot easier to replace.
 
Back
Top