Technical Random starting problems after cambelt change

[Voko]

Hi All,

A bit of an odd issue, I changed the cambelt using the guide and confident everything is set up ok, went for a drive everything ran beautifully. However, sometimes when I start the car it has to crank for ages (10s of seconds) before it starts, but sometimes it starts first pull. Once it does start it runs perfect idle and on the road. I’m guessing I’ve disturbed something, or having the battery disconnected a long time has done something. Could be a coincidence? Anyone have any thoughts about what could randomly effect starting but nothing else, it can happen hot or cold I can hear the fuel pump prime every time and the ‘key’ symbol goes out on the dash

All done an ECU scan etc no errors showing

Cheers

Mike

 

[tjr]

Hi Mike,
Glad to hear all went well with the cam belt swap. Just wanted to offer my good luck wishes!

Lacking the competence and having half-sorted cold-cold start issues on the b-95 (see link below), I'll for your sake abstain from any guessing(!). For the b-95 I'll continue disconnecting and cleaning sensor and ground connections. If the problem(s) persists I'll, thanks to @Ilkka, start investigating the Lambda sensor, MAF, and individual fuel injector function.

Good luck in the sleuthing and hoping you'll share your findings/ruling-outs for forum-hive-knowledge-bank building,
tjr

Fuel pump(?) advice sought... | FIAT Barchetta

The b-95 is now 29 years old, so I suppose all parts have the right to give up... Symptoms: The b-95 has always been eager to start during the two years I've known it, but this season, it is in need of "priming", ie activating the pump 2-3 times with the key (back and forth between OFF and...

www.fiatforum.com

 

[Voko]

Thanks…nothing found as yet, I might try swapping out the crank sensor as they are cheap….one thing that is cheap