General 2012+ Panda seats into 2004 car

[boguing]

Anyone know if they'll fit? And if not, may I really push my luck and ask which Fiat model last used seats which will fit?

I've worn through the driver's seat at a mere 65k miles and don't really fancy covers, so looking for the newest alternative.

 

[koalar]

Non direct


Only 3 out of the four bolt line up


The 500 and 319 need the rail swapping over

Swapping the seat bottom for the passengers is easy, two bolts

 

[boguing]

Non direct


Only 3 out of the four bolt line up


The 500 and 319 need the rail swapping over

Swapping the seat bottom for the passengers is easy, two bolts

I think I'm being a bit dense, long day.. Get 500/319 seats and from what I think you're saying, the width is right and it's the attachment points that differ. Just slide the bottom part off, or unbolt the runner assemblies from the bases.? (I'd sort of assumed the upper part would be welded on).

I'm not sure which part of the passenger seats you mean is removed via two bolts?

 

[koalar]

The seats are in two parts

The frame and back

And the square bit you sit on

Passenger and drivers are identical, 2 minute swap


Changing seats for a 500 or 319

Only 3 of 4 holes line up

you have to get creative for the last one

There's several way people have swapped the whole rail or

Panda seat swap question | FIAT Panda (Mk3)

I’ve seen several threads about fitting 500 seats into a Panda (with a bit of fettling on one mount?) My Panda seats are a bit knackered, so I’m thinking of doing the swap. However, from what I can see, there was a change to the 500 mounts at some point, so I’m worried that some 500 seats may...

www.fiatforum.com

not a straightforward swap, but not super difficult either.

 

[boguing]

The seats are in two parts

The frame and back

And the square bit you sit on

View attachment 446243

Passenger and drivers are identical, 2 minute swap


Changing seats for a 500 or 319

Only 3 of 4 holes line up

you have to get creative for the last one

There's several way people have swapped the whole rail or

Panda seat swap question | FIAT Panda (Mk3)

I’ve seen several threads about fitting 500 seats into a Panda (with a bit of fettling on one mount?) My Panda seats are a bit knackered, so I’m thinking of doing the swap. However, from what I can see, there was a change to the 500 mounts at some point, so I’m worried that some 500 seats may...

www.fiatforum.com

not a straightforward swap, but not super difficult either.

That's really helpful, thanks. And to @NigelO for his thread.

Let's see if I can find any at a price/car value ratio of less than 1.