Styling Fitting abarth seats in panda 100hp

[Oliviero77]

Hi guys
I’m going to try and fit some abarth 500 seats into a panda. Any suggestions or advice?
Help is massively appreciated.

 

[koalar]

Panda seat swap question | FIAT Panda (Mk3)

I’ve seen several threads about fitting 500 seats into a Panda (with a bit of fettling on one mount?) My Panda seats are a bit knackered, so I’m thinking of doing the swap. However, from what I can see, there was a change to the 500 mounts at some point, so I’m worried that some 500 seats may...

www.fiatforum.com

I am assuming your 100hp seats aren't fitted with curtain airbags

Only 169 seat fit without modification, post 2012 and 500 will need modification

@Cook1e fitted arbarth seats into a Panda multijet, same floorplan

 

[Oliviero77]

Panda seat swap question | FIAT Panda (Mk3)

I’ve seen several threads about fitting 500 seats into a Panda (with a bit of fettling on one mount?) My Panda seats are a bit knackered, so I’m thinking of doing the swap. However, from what I can see, there was a change to the 500 mounts at some point, so I’m worried that some 500 seats may...

www.fiatforum.com

I am assuming your 100hp seats aren't fitted with curtain airbags

Only 169 seat fit without modification, post 2012 and 500 will need modification

@Cook1e fitted arbarth seats into a Panda multijet, same floorplan

Thanks this is appreciated !

 

[cooperman]

They fit easy enough you just have to drill off one of the rear brackets on each of the original seats and swap them onto the new 500 ones, I think it’s the outer bracket on each seat

 

[Decronium]

I'm sure this is in the resources somewhere