General 1st National Panday 4x4 - Peak District
- Thread starter panda1408
- Start date
Currently reading:
General 1st National Panday 4x4 - Peak District
Oh without a doubt Andy 
Lewis I'm having a constant clear out haha!
John I will try did some random bits out for fallout.
Lewis I'm having a constant clear out haha!
John I will try did some random bits out for fallout.
I may have missed it, but what's the postcode for where we're meeting?
Thanks
Thanks
Ah yeah, good memory! I'd totally forgotten about that. Yes please, I'll be there and I'll be square!! :slayer:
I'll see if I've got some spare racing decals from the Marbella as well.
Andy do you still need a leaf spring? Was there anything else?
OP
OP
I will be sending a PM to everyone this weekend with the details and some directions. Most sat navs send you the wrong way unfortunately as we are slightly out of the way.
Awesome.
PandaL had it's service this week... And we couldn't find the locking wheel nut key... Got one now though!
Hello everyone, is anyone selling/getting rid of a parcel shelf thats going to the panday?
Many thanks, Lewis
Many thanks, Lewis
OP
OP
Just sent everyone a PM with address and directions, hope it makes sense and I've not missed anyone out!
I fixed the floppy wing mirror (the nut was loose...), sorted out the half opening window (the channels needed lubricating...) and looked in the shed and found a decent battery that doesn't go flat every 12 hours. Put that on and took the Sisley out for a drive this morning. All seems OK...
I'm looking forward to this
If we are doing requests, has anyone got a right hand numberplate light. I need the lens with the bulb holder still intact.
Also if anybody has a good left hand wheelarch that has been chopped out I would happily swap it for beer tokens. It would make my life a bit easier when I have to cut out and weld this up....
I'm looking forward to this
If we are doing requests, has anyone got a right hand numberplate light. I need the lens with the bulb holder still intact.
Also if anybody has a good left hand wheelarch that has been chopped out I would happily swap it for beer tokens. It would make my life a bit easier when I have to cut out and weld this up....
Attachments
just so folk know, i will be bringing along:
a jerry can of fuel (with filling spout) if some one runs out.
Towing kit (old crane hoist and a pretty heavy duty ex military ratchet strap and large and small D Shackles) i dont think we will need it but i'll bring it along anyway.
i have some spare ignition system parts. mostly modules, but i do have sapre HT leads, cap and rotor arm.
Jump leads and a spare battery (always have these in the car anyway)
light tool kit (well.. enough to about dismantle a panda with) and soldering capabilities.
2x Marbella headlamps (one broken one not) for Mr. pandamonius_maximus
1x Mark 1 Sisley rear bench seat for Mr. andyholli
Anybody else need anything?
a jerry can of fuel (with filling spout) if some one runs out.
Towing kit (old crane hoist and a pretty heavy duty ex military ratchet strap and large and small D Shackles) i dont think we will need it but i'll bring it along anyway.
i have some spare ignition system parts. mostly modules, but i do have sapre HT leads, cap and rotor arm.
Jump leads and a spare battery (always have these in the car anyway)
light tool kit (well.. enough to about dismantle a panda with) and soldering capabilities.
2x Marbella headlamps (one broken one not) for Mr. pandamonius_maximus
1x Mark 1 Sisley rear bench seat for Mr. andyholli
Anybody else need anything?
One massive pot of copper slip!
Does anyone want to buy my old Bull Bars?
PM me a price Freebo
I think they would look good on Henry!
I'm a bit cheesed off that the Italian light grilles I've just fitted don't match - one has five bars the other four - can't be bothered trying to argue through google translate about it.
I'd love them for Talon, not sure how much they are worth but i will start by saying that i wish i could afford them >_< sadly i will only be bringing about £15 with me to this trip as it is all i have! (unless some one wants to buy any panda parts off me that i can bring along???)
if you are after some that look like Talons.. would you consider a swap?
im not sure of the condition of those you have but talon's was powder coated a year or so ago so they are in pretty good shape. they have the top bar and a stainless steel CB aerial mount welded on by me.
let me know!
if you are after some that look like Talons.. would you consider a swap?
im not sure of the condition of those you have but talon's was powder coated a year or so ago so they are in pretty good shape. they have the top bar and a stainless steel CB aerial mount welded on by me.
let me know!
Interior recovered from lockup #1 John - seems intact, no micees been eating it!
Great, just out of interest what number do the lockups go up to?
I've got a spare new panel that goes underneath the windscreen if anyone needs one? It came with the car when I bought it, apparently it has a small mark on it but I haven't looked yet - if anyone needs one then let me know and I'll investigate it a bit further!
