General Radiator for 1994 1000fire CLX is this it?

[Flossyfly]

http://cgi.ebay.co.uk/ws/eBayISAPI....m=150144182799&ssPageName=STRK:MEWA:IT&ih=005

The details so it is but I would like to call upon the experts in the forum to confirm it for me before I buy it. Thanks guys....

 

[Chas Uno]

It says it covers the following:

1.0 FIRE 04/86 -
1.1 FIRE 03/92 - 07/95

So looks like it should be ok. Someone else know for sure?

 

[pandafan]

Yes ... It's identical to one that I took out of a CLX last year

 

[Most Easterly Pandas]

It should be. Check the 580mm length. As long at its not the smaller radiator which is fitted to the 750's as the car might over heat then.

Jon.

 

[Flossyfly]

Well I have bought it.....
Gonna try and fit it myself. Seems fairly straight forward I think. Any tips!

 

[Most Easterly Pandas]

I personally would do a fully coolant system flush whilst the rad is off. Should be straight forward. I've never had to fit one, but was easy enough to remove the one out of the donor 750L we have.

 

[Flossyfly]

I personally would do a fully coolant system flush whilst the rad is off. Should be straight forward. I've never had to fit one, but was easy enough to remove the one out of the donor 750L we have.

I have two manuals and a set of new spanners lol.
Getting the rad off and putting the new one on is not gonna be difficult. Its getting the coolant system running properly again thats gonna need the attention. Am fairly confident that I can do it and my mechanic is only round the corner.
I will let you all know how I get on

 

[Most Easterly Pandas]

Good luck. Its normally getting the air out of the heat matrix which causes me the most fun.