Technical Panda 4x4 rear wheel bearing and hub

[scott73]

I have a Panda 2010 4x4 1.2 and wanted to replace the rear wheel bearing, at first i purchased just the bearing which I still have but then read its best to replace the whole hub and I could do this myself as no press is needed. The hub arrived but its not the same size as the bearing, the bearing is 35mm and the bearing in the new hub is 30mm.

Links to the parts

Bearing https://www.eurocarparts.com/p/starline-wheel-bearing-kit-628650239

Hub/Bearing https://www.partsinmotion.co.uk//ca...rint-wheel-bearing-kit-rear-adbp820008-detail

I know i can take off the old hub to check but I use the car for work daily and can't wait for a mechanic if I can't get the hub.

Anyone know what its is on a 4x4 (35mm or 30mm) and if so have a link to the correct hub/bearing kit.

 

[koalar]

I believe the hub is 7672265 and 35mm

 

[Metzze]

I believe the hub is 7672265 and 35mm

View attachment 461017

Please help, any suggestion to where I can buy “support” part number 51856892? Mine is so rusted that lock ring, support and bearing outer race is now one part. I cannot get the bearing race out.

I guess the dealer request an arm and a leg, as they did for the bearing.

 

[koalar]

Please help, any suggestion to where I can buy “support” part number 51856892? Mine is so rusted that lock ring, support and bearing outer race is now one part. I cannot get the bearing race out.

I guess the dealer request an arm and a leg, as they did for the bearing.

Here in the UK secondhand would be the way to go

Postage is a killer though

What's the postage like Italy to Sweden, there's normally some on the Italians eBay

 

[Metzze]

Thanks for the prompt answer. I found one at a Swedish scrapper (unknown price) and two in Italy. Hope to fix it soon. I will display it on an Italian car 1st of may.