endrop - for all your online needs

General Leaking Windscreen

Currently reading:
General Leaking Windscreen

The vents are a favourite 'rot-spot'.
They feed into a corrugated drainage pipe with a slit 'squeeze-globe' at the end. This rediculous thing gets blocked very easily and nobody ever bothers to squeeze it. Consequently, the pipe fills with water and the rot sets in.
Unscrew and remove the outer air intakes at eacch side of your winndscree and poke about with a screwdriver. I guarantee that you will find your leak. (y)
 
It may appear a daft question but how much water and when?

If its only when its raining and your driving with the vents open then it maybe the Panda's inbuilt shower option;) The vents are so short and straight that rain water can be thrown onto you while driving.
 
panda-sport said:
It may appear a daft question but how much water and when?

If its only when its raining and your driving with the vents open then it maybe the Panda's inbuilt shower option;) The vents are so short and straight that rain water can be thrown onto you while driving.
Click to expand...

Hi

Only noticed at the moment when he's stationary and its got to be POURING down, not just a drizzle. .. :confused:

Thanks for advice....
 
Oh dear, yes i had this problem with mine. Its almost definately rust, which means a spot of welding probably. Or fibre glass is my favourite :D
My car used to develop a pool of water in the foot well after heavy rain, which was not incouraging. Its such a weak spot in the design, the drain pipes that are suposed to help, actually give a great little rust spot.

Might be a dumb question though, were these pipes kept in the mk 2 design?

Cheers
Si
 
Try cleaning the pipes that run from the air vents and on the end they have a cover with a slit in. Remove the cover and clear out the crap and that might help a bit. ( these pipes are in the engine bay usually hanging somewhere)

Cleared ours out and found half a forest growing in them.
 
Last edited:
i had a leak, took screen out and this is what i found:cry: still a bit of grinding and welding later and all is well again(y)
 

Attachments

  • 2006_0806Image0003.JPG
    2006_0806Image0003.JPG
    714.3 KB · Views: 27
  • 2006_0806Image0005.JPG
    2006_0806Image0005.JPG
    745.5 KB · Views: 26
  • 2006_0806Image0006.JPG
    2006_0806Image0006.JPG
    733.3 KB · Views: 33
  • 2006_0806Image0010.JPG
    2006_0806Image0010.JPG
    762.8 KB · Views: 30
  • 2006_0806Image0011.JPG
    2006_0806Image0011.JPG
    673.3 KB · Views: 17
Charlotte said:
Scared to look now! :eek:
Click to expand...

:eek: Sorry, bare in mind mine is a 21 year old mk1 with metal bought off the mafia! lol, well probably! Yours wont be that bad though. That had got to the stage of huge holes next to the vents that had been badly bridged by my dad with fibre glass!

Hope all is well with yours anyway, let us know what happens....

Si
 
You must log in or register to reply here.

Similar threads

T
General Fuel leak
2
Replies
24
Views
551
tobywood13
T
Hharbers
Technical Oil leak engine
Replies
13
Views
1K
binhoker
B
A
Technical Leaking Gearbox Gasket
Replies
1
Views
996
bruu
bruu
A
Technical Rocker cover oil leak.
Replies
4
Views
2K
Pugglt Auld Jock
Pugglt Auld Jock
A
Technical Panda 4x4 leaking.
Replies
10
Views
2K
Albert Alfvag
A
Back
Top