General Front seat upgrade.

Currently reading:
General Front seat upgrade.

Ezika

New member
Joined
Oct 19, 2023
Messages
2
Points
1
Location
Peacehaven
Hi, I’ve just bought an 04 Panda as a cheap run around while my mx5 is off the road. The drivers seat has collapsed at the base so I’m thinking if I have to replace it anyway are there any common upgrades from another model like a Punto or a 500 or something? Looking for something that’ll bolt straight in. Thanks in advance.
 
You’d probably be best just finding a replacement seat from another Panda of the same shape. These 03-2012 models can have it swapped with the 500 but I’m not sure if there is a bit of work needed to modify them or if it’s a straight swap.
 
Thanks guys. I’ve since had a look at 500 seats and to be honest they don’t look like they’d be worth the hassle. Seen a £100 bracket that would allow me to borrow the Sparco buckets from my other car but I can’t justify that 😂
Guess I’ll go for a stock replacement. Thanks again.
 
If its any help, the seat bases are identical, so you can easily swap the passenger one for the worn out drivers seat.
Also helps to know when looking for secondhand ones.
(You can also swap the backs side-to-side, but it's quite a bit more work)
 
The modification to fit 500 Abarth seats is minimal. One bracket needs to be removed from the Panda seat rail and fitted to the 500 seat rail.

Drill out the rivets to remove the bracket, bolt it to the 500 rail.

I fitted an entire interior in a couple of hours.

check out this thread - seat swap

The 500 seats are WAY better than the Panda seats - I can now do several hours in the driver's seat with no discomfort
 
Back
Top