Fiat VP2 NAND repair BOOT LOGO FAIL

[Hiddenvision]

If you have got here looking for a fix for a VP2 unit that is stuck on the boot logo I may have a fix for you.

Takes about 2 hours. Best for me to do it with the car so I can test everything but if you want to post the unit to me I can attempt to fix so it boots and then you need to finish with a normal SW update via USB.


NO FIX no charge.
Located in SW London.


Hope this helps


Hv.

 

[Hiddenvision]

Re: Fiat 250 VP2 NAND repair BOOT LOGO FAIL

Ooo,
I just found out that there is more than one VP2 unit.
Someone just asked about a "330 VP2"


So to confirm my post above refers to the "250 VP2" as that is the only radio I have a working dump for.


I guess in time I may find a Working 330 to read but who knows.


Hv.

 

[chris3234]

Theres a bunch of these units then also the newer vp2r units fitted to some of the newer models like the tipo

 

[Hiddenvision]

Hey Chris
Well the owner of the 330 unit is posting it down so we can give it a go after some looking and testing.


The 250 and 330 units look very similar perhaps it is just the facia that differs, who knows.!


I shall update this once I know for sure.


Hv.

Theres a bunch of these units then also the newer vp2r units fitted to some of the newer models like the tipo

 

[mantasel]

If you have got here looking for a fix for a VP2 unit that is stuck on the boot logo I may have a fix for you.

Takes about 2 hours. Best for me to do it with the car so I can test everything but if you want to post the unit to me I can attempt to fix so it boots and then you need to finish with a normal SW update via USB.


NO FIX no charge.
Located in SW London.


Hope this helps


Hv.

Hi, i need fiat 250 FL VP2 ECE NAV working dump, can You share it? Thanks.

 

[Malnisbett]

If you have got here looking for a fix for a VP2 unit that is stuck on the boot logo I may have a fix for you.

Takes about 2 hours. Best for me to do it with the car so I can test everything but if you want to post the unit to me I can attempt to fix so it boots and then you need to finish with a normal SW update via USB.


NO FIX no charge.
Located in SW London.


Hope this helps


Hv.

Hi there
I have a 330 VP2 from a 500l stuck on the Fiat logo, is this something you could help with?
Many thanks
Mal

 

[chris3234]

Hi there
I have a 330 VP2 from a 500l stuck on the Fiat logo, is this something you could help with?
Many thanks
Mal

The user has not been around for some time I don't think they check here anymore
@Hiddenvision

 

[Malnisbett]

The user has not been around for some time I don't think they check here anymore
@Hiddenvision

Thanks Chris

 

[R1LEF]

If you have got here looking for a fix for a VP2 unit that is stuck on the boot logo I may have a fix for you.

Takes about 2 hours. Best for me to do it with the car so I can test everything but if you want to post the unit to me I can attempt to fix so it boots and then you need to finish with a normal SW update via USB.


NO FIX no charge.
Located in SW London.


Hope this helps


Hv.

Hi, i've good programmer for this job and FW on USB, i'm working on bench, VP2 start, USB's blinking but VP2 stay on FIAT, can you help me ?