Technical ESC and Hill Holder problem - Limp mode

[sliderr]

Hi today i was driving my 2016 ducato and suddenly i got "ESC and Hill Holder message" and check engine light and the car went into limp mode, the limp mode seems to resolve it self after restart but the check engine and the yellow triangle remain, anyone knows this issue and how to resolve it? it scared the h3ll out of me..

 

[bugsymike]

Hi today i was driving my 2016 ducato and suddenly i got "ESC and Hill Holder message" and check engine light and the car went into limp mode, the limp mode seems to resolve it self after restart but the check engine and the yellow triangle remain, anyone knows this issue and how to resolve it? it scared the h3ll out of me..

May be totally unrelated but I had those same warnings on a 4x4 Skoda Scout, ESC,Hill Holder etc. but also ABS.
After checking all the sensors etc. I found a faulty wire in the loom. Apparently the Skoda and VW versions have a common wiring fault for which a replacement wiring section was available, unfortunately for me that failed to fix it and I had to replace a wire much further into the loom.

 

[lejm]

Hi today i was driving my 2016 ducato and suddenly i got "ESC and Hill Holder message" and check engine light and the car went into limp mode, the limp mode seems to resolve it self after restart but the check engine and the yellow triangle remain, anyone knows this issue and how to resolve it? it scared the h3ll out of me..

Did you solve this problem? We have the similar issue we cant find the problem with.

 

[sliderr]

Yes i solved it it turned out to be my gaspeddal ( https://www.ebay.de/itm/192698676937 ) and 2 ABS sensors with bad wiring, just in case we changed all of them (back ones needed to be drilled out) but problem is solved drove 2500 KM since then without any errors in the boardcomputer or "hillhold" messages, the yellow triangle turned out to be a bad oil pressure sensor which was changed also.

 

[lejm]

Yes i solved it it turned out to be my gaspeddal ( https://www.ebay.de/itm/192698676937 ) and 2 ABS sensors with bad wiring, just in case we changed all of them (back ones needed to be drilled out) but problem is solved drove 2500 KM since then without any errors in the boardcomputer or "hillhold" messages, the yellow triangle turned out to be a bad oil pressure sensor which was changed also.

Thanks. You are Swedish I see. Did you have it at a repair place that fixed it my I ask witch one?
The ones we talked to seem to have no clue about the issue.

 

[sliderr]

i fixed it myself - i can read out your car if you want and see if its simulair then mine.