Communicator
Prominent member
- Joined
- Aug 3, 2019
- Messages
- 2,904
- Points
- 791
I am pleased that you are now more confident. However I still think that there is nothing unusual about your connector D018B.
In your photo the two wires at the upper left of the connector should be pink/green, and red/green, the other two are covered in black tape, but should be yellow/black, and white/violet reading down the page. Perhaps you have not realised that the eLearn diagram does not show the connector poles in the physical order. You need to look at the numbers in the rectangular box on the drawing.
Wishing you success.
In your photo the two wires at the upper left of the connector should be pink/green, and red/green, the other two are covered in black tape, but should be yellow/black, and white/violet reading down the page. Perhaps you have not realised that the eLearn diagram does not show the connector poles in the physical order. You need to look at the numbers in the rectangular box on the drawing.
Wishing you success.
