Technical battery bracket loose?

Currently reading:
Technical battery bracket loose?

offnote

Member
Joined
May 17, 2020
Messages
37
Points
69
Hi, just replaced stock battery which was BTW kinda small for such car (pic below) and with new bigger battery I have very loose bracket that screw on top. What''s the trick here? New Exide battery is just longer but height and width is the same
 
Model
2.3 130 L1H1
Year
2019

Attachments

  • exide-100-premium.png
    exide-100-premium.png
    200.2 KB · Views: 53
  • 1739611684640.jpg
    1739611684640.jpg
    1.5 MB · Views: 40
Looks about right. Just turn the nut till the clamp presses lightly on the battery - not too tight. Just enough to stop the battery sliding about and keep it in place if the van rolls over.
Its designed so you can't tighten it so hard you damage the battery or the box - both are only thin plastic. But if its very loose you could put a bit of soft packing in.
 
Last edited:
wonder if there is any additional lock keeping that bracket from moving or something
 
Back
Top