Technical Automatic gearbox drive shaft

[AJR7]

Hi ,to all ..I am having issues getting hold of drive shafts to fit a MK2 fiat 2003 2.8 jtd ducato with a zf automatic gearbox..
The gearbox specialist I have used have serviced the zf automatic box, replaced the damaged diff cup and serviced the diff , but the new drive shaft they had fitted according them is incorrect. But they are now saying they cannot get a replacement , I am hoping someone here on the forum could point me in the right direction to a supplier, the van is to good to scrap.
Any ideas

 

[varesecrazy]

Hi ,to all ..I am having issues getting hold of drive shafts to fit a MK2 fiat 2003 2.8 jtd ducato with a zf automatic gearbox..
The gearbox specialist I have used have serviced the zf automatic box, replaced the damaged diff cup and serviced the diff , but the new drive shaft they had fitted according them is incorrect. But they are now saying they cannot get a replacement , I am hoping someone here on the forum could point me in the right direction to a supplier, the van is to good to scrap.
Any ideas

Have you got the part number?

ePER should Detail that

The thing others on here have seen:

A new supplied shaft is shorter than the Original,

So the Joint either end on the Original gets rebuilt,

I don't know where the issue lies with your shaft m joint?

 

[AJR7]

Have you got the part number?

ePER should Detail that

The thing others on here have seen:

A new supplied shaft is shorter than the Original,

So the Joint either end on the Original gets rebuilt,

I don't know where the issue lies with your shaft m joint?

If I find out how to use the ePER function ? would I be able to find the sizes of the correct drive shafts I need or at least a part number ? Can parts numbers be found from the vin numbers?