General 17" alloy wheels

[mafia27]

hi all.can anybody please help me with the messurements of the sporting rims the tyres are 205/45/17" i would like to know if the rim size is : size7.00 * 17 : pcd 4/100.0 : offset 38.0 as im looking to replace mine as 2 rims are very slightly buckled otherwise all in very good condition.thank you.:worship:

 

[steve119]

pcd 4x100 don't know what offset it is.

 

[mafia27]

thanks steve119 im now half way there.could there be any other way of finding out?any others on here that might know the off set i really would appriciate that.like ive been told its 38.0 dont want to buy wrong sized ones.thanks once again

 

[CromaFan]

As far as I remember fiat 4 stud Is 4x98 not 4x100. They may fit but I'd much prefer the correct pcd. Plenty of guides online just Google wheel pcd guide

 

[Rackham115]

PCD is 4x100 with a centre bore diameter of 56.6mm. 17" Rim width is 6J with an offset of 43mm iirc.

 

[mafia27]

Thanks for the replies.The pcd says 4*100 according to a large tyre and rim website you put sporting rim 17 inch mesurements for fiat grande punto.the only problem is it says the offset can be between 38 up to 46 really confusing.
I thought it could only be one size.i really appriciate all the input so far thanks once again.

 

[the rake]

As far as I remember fiat 4 stud Is 4x98 not 4x100. They may fit but I'd much prefer the correct pcd. Plenty of guides online just Google wheel pcd guide

Not anymore, since the Grande shares the chassis with Vauxhall Corsa D's.

They are most definitely 4x100.

Centre bore is 56.6.


With regards to the offset being from 38 to 46

I think that refers to the fitting parameters of any alloy on the car...

Though this isn't necessarily true, my 9J's were et25.


Which alloys are you looking for, the forked or straight....?

 

[the rake]

The forked have an offset of 38

 

[Rackham115]

Thanks for the replies.The pcd says 4*100 according to a large tyre and rim website you put sporting rim 17 inch mesurements for fiat grande punto.the only problem is it says the offset can be between 38 up to 46 really confusing.
I thought it could only be one size.i really appriciate all the input so far thanks once again.

Offset can be adjusted plus or minus 5mm from memory.

 

[Sweex]

Offset can be adjusted plus or minus 5mm from memory.

Not without spacers or the inside of the wheel where it sits against the hub being machined.

 

[mafia27]

many thanks for all the different replies.they have been very helpful.the rims im looking at are the straight ones or the ones that came out on the series 2 grande punto its the 5 double spoke alloy wheels.the size tyre reccomended is 205/45/17inch to fit properly.according to fiat themselves.i know that the abarth has 215/40/17 fited as standered as far as i remember.im wondering if the straight alloys 17 inch have the same offset as the forked alloys.[The rake] thanks for lettting me know the offset of the forked alloys 17 inch.Once again many thanks to all of you for your help.looking foward to any more ideas.

 

[mafia27]

hi rackham115 if is 5 mm either way then offset of 38 to 43 should be ok without the need for spacers between hub and rim.? thank you..

 

[the rake]

Well, to be fair, many people on here and elsewhere have upgraded to the standard 17's that Fiat put on the Sportings, M-Jet's etc with no problems as to fitting.

Ideally 205/45/17 is the way to go. Though.personally I like the look of a 225/45/17 just on the rears, makes the rear look a little meaner...

 

[matt graham]

Hi im needing help on the size of alloys i can put on my car, will these fit on a 2010 fiat punto grande? 4 stud multifit wolfrace, 205/40/17.

Cheers

 

[AdamRyan]

Yeah should go straight on

 

[matt graham]

Cheers adam ryan

 

[matt graham]

Will this size wheel fit a 2010 fiat punto grande 1.4 active 215-45-17 they are fiat wheels im looking at buying.

 

[Sweex]

What fiat wheels are they?
Grande puntos have PCD of 4x100 and all other fiats are 4x98.
Also, the centre bore on grande punto is 56.6mm and on most other fiats is something like 58.1mm.

So in conclusion you'll need wobble bolts and spigot rings if you wish to fit fiat wheels to the grande punto.

 

[matt graham]

Hi, im looking at buying some 17" multi stud alloys for my 2010 fiat punto grande will these fit? 215/40/17

 

[matt graham]

17, x7jj