Technical T-Jet Engine Cover

[Gordanovich]

Does anyone know how to take the engine cover off a T-Jet? I've removed the pipes, undone the clips and removed the two bolts, but there's this bit at the back that isn't shown in eLearn at all:

Apologies for the rubbish camera phone pic. It doesn't appear to be any kind of screw head, just a circular hole.

I don't want to just try and yank it off in case I break something, but I can't see any way to remove it.

 

[Gordanovich]

Nevermind, I figured it out (eventually) . I will post an explanation later for anyone who wants it.

 

[Gordanovich]

Alrighty:
You have this odd little mount for the engine cover:

And it's just a rubber grommet that slips underneath the top bit:

I daresay that if you pulled hard enough it would come off but what I did was get a little flatblade screwdriver and work my way around prising the inner edge of the grommet up over the lip of the mount.

Hope this is useful to someone.

 

[RobW]

Alrighty:
You have this odd little mount for the engine cover:

And it's just a rubber grommet that slips underneath the top bit:

I daresay that if you pulled hard enough it would come off but what I did was get a little flatblade screwdriver and work my way around prising the inner edge of the grommet up over the lip of the mount.

Hope this is useful to someone.

it looks like a butt plug

 

[Luisc]

Hi any idea if is the same rubber mount as this?