General What do you need

[Nino_1975]

All
:chin:
Am loooking at supplying parts for the Fiat Barchetta.

Can you let me know what you may be intersted in. I am fed up of parts being hard to get hold off and expensive.

:idea:

:wave:

 

[alfa20v]

How about a whole car for me



That one last night was nice cosmetically, but not so good mechanically - no heat shield, radiator a funny shade of green, squeeling from rear bearings, no fog lights, rusty steel wheels...etc etc etc

Back on topic, how about the low spoilers with integrated 3rd brake light? I think they look

 

[mark m]

I would look at all the things that go wrong with fiat barchettas for mech parts then i would look at stocking some nice accessories. Here are things i would stock if I were you: Variators, Heat Shields, Rear zip up screens etc. I would stock those neat Barchetta logo badges that are really hard to get hold of along with graphics etc, wind shields and luggage racks etc. Light covers, bulbs, dash stuff wood effect surrounds, cloth barchetta badges which velcro onto the seat fabric. Stone chip paints in Barchetta listed colour codes, window stickon clear plastic cut to the shape of Barchetta front foglights to protect from stone damage, new two pronged fiat rear badge to replace weather faded ones,
fake plastic individual seat rollbars to encourage cheaper option buyers.
Hope this gives you some ideas.

 

[Nino_1975]

Thanks Mark

Rear window, it's cheaper to buy a new hood.

I can get:-
Heated Seats (The electrics)
Light covers
Spoilers / Body kits
Rear badges £11
Roll bars £120
Wood / carbon effect £40ish
Carpets from £40 to £70
Wheels
Lowering kits
Improved clutch
Improved breaking system
Strut braces

I am looking at styling parts and upgrades, as Fiat UK and DTR do the rest.

 

[OZ Seicento]

The roll bars and mats maybe of some interest in the future nino.
Are they the mats that are perfectly shaped to fit the footwell?
Cheers

OZ

 

[Nino_1975]

OZ - Depends on how much you spend, the ones I have cost £70 and made from thick material and fit perfectly.

Mail / PM me anytime for any parts.

Thanks
S

P.S If I don't have them I'll tell you where you can get them

 

[OZ Seicento]

Cheers Nino thats great
OZ

 

[Nino_1975]

OZ

Where did you fit the "Honda S2000 start button"????

Thanks

 

[Iskander]

Been thinking about what I'd like on my car if I decide to keep it a bit longer.
How about:
aluminium inner sill plates
aluminium foot pedals
aluminium handbrake and gearknob thingies (me like aluminium by the way )
are there any dress parts for the inner door release and handle out there?
new version badge for the steering wheel
aluminium tax disc holder with barchetta etched

 

[Nino_1975]

Been thinking about what I'd like on my car if I decide to keep it a bit longer.
How about:
1) aluminium inner sill plates (Don't bother, none fit, the plastic is there for a reason)
2) new version badge for the steering wheel (Never known of any as the fiat goes inside the plastic.
3) aluminium foot pedals (E-Bay is the best as you can get loads cheaply)

The rest is easy depends on how much you want to spend.
aluminium handbrake and gearknob thingies (me like aluminium by the way )
Yes I can get, PM me your e-mail address and I'll send some pics.

are there any dress parts for the inner door release and handle out there? NE

aluminium tax disc holder with barchetta etched Don't bother, the weight makes them heavy and they keep falling off. I binned mine in anger.
Let me know via PM what you in list order and I'll price up for you.

 

[OZ Seicento]

Nino,
It went were the harzzard light button used to be in the centre of the console

OZ

 

[Nino_1975]

Where did you re-fit the Hazard light switch? any pics you can show, Easy Job?

Was thinking the same. IS the hole an exact fit?

 

[topride1]

All
:chin:
Am loooking at supplying parts for the Fiat Barchetta.

Can you let me know what you may be intersted in. I am fed up of parts being hard to get hold off and expensive.

:idea:

:wave:

I'd be interested in roll bars, and a wind break like the 1 youve got on yours, ive seen the web site that sells them but cant understand it coz its all foreign!!:bang:

 

[OZ Seicento]

Nino, i didnt re-wire the hazzards anywhere, just pushed them back.
it doesnt sit flush, its setback like the dials so it is hidden too.
I didnt wire it up but dont think its too big a job
No no pics yet

OZ

 

[Nino_1975]

That would fail the MOT then I guess, humm, well if you get pics I would like to see it, would you recommend it?

 

[OZ Seicento]

It shouldnt because the hazzards are there, they are just pushed back. plus the car isnt even a yr old so i dont have to worry for another 3yrs then ill pull it forward.
Yea, its a good job. Im looking at fitting one to the seicento to, if i can find somewhere to put it. I put one in my bro's starlet, it replaced the cig lighter , its tidy
Ill try and get a few pics for you. Chances are they will be too big for the forum so ill try emailing them to you nino.

OZ

 

[Marco84]

I can get:-
Spoilers / Body kit

do you have some pictures?

 

[OZ Seicento]

Not yet mate
car has been sitting in belfast all week so once its hone and clean and wheel are back onn ill get them up for you all to see.
Cheers

OZ

 

[Nino_1975]

Marco

I have many pics but you have to let me know what you want as I do not have them on my car but in storage.

 

[Marco84]

Nino... Perhaps front bumper and side skirts. Are this products with Tüv?