Technical Rear speaker wiring pick up point?

[nickmair]

Hi, newbie here....I have a 2021 2,300 Euro6 Ducato 250 based CV40 campervan and I want to fit rear speakers. Where can I pickup rear spkr wiring pls. I can see that the connector at the back of my radio/nav unit does include rear spkr wiring, but where can I best access those wires?
Thanks

 

[the green vanper]

Hello,

Those two threads might be helpful:

Rear Speaker wires (non coachbuilder option) | FIAT Ducato

I've got a 2019 (68 plate) Ducato without the coachbuilder socket in the B pillar and want to connect some rear speakers. I've pulled the radio out and confirmed that the connector is wired for all 4 speakers. Does anyone know where the speaker wires go to?

www.fiatforum.com

Fiat Ducato original factory rear wiring harness connectors colours photos diagrams 290 vs 250 | FIAT Ducato

I noticed that there are some differencee of the 290 rear camera wiring vs 250 apparently it appears that 290 8pin connector has 4 wires whereas 250 8pin connector has 6 wires. I wonder why

www.fiatforum.com

 

[Formula 91]

Hi Nick, I recently added rear speakers to our CV80 using the info found on the CV FB group. Connections are bottom of the B pillar adjacent to the drivers seat behind the black trim. I ordered the mating 6 way connector from eBay Here

 

[nickmair]

Hi, thanks for responding and especially for including a link for the connector.
Nick

 

[the green vanper]

Just two more things.

FIAT is messing with their model coding. Post 2014 vans are coded x290 / x295 Even though the VIN starts with ZFA250, like in the models produced between 2008 and 2014. I'm not sure when they introduced the x295 naming. Might be 2020. But it's just an assumption.

In the download section of the forum you'll find a converter's manual issued by SEVEL (the factory). I assume you will find useful information on how the base was delivered to Elddis. There are two different docs, one for the x250, the other one for the x290. However bear in mind that the document was issued a couple of years before you van has been produced.

2020 might be a milestone year when they again changed many things (new engines, probably also gearbox change).

 

[Formula 91]

Just two more things.

FIAT is messing with their model coding. Post 2014 vans are coded x290 / x295 Even though the VIN starts witf ZFA250, like in the models produced between 2008 and 2014. I'm not sure when they introduced the x295 naming. Might be 2020. But it's just an assumption.

In the download section of the forum you'll find a converter's manual issued by SEVEL (the factory). I assume you will find useful information on how the base was delivered to Elddis. There are two different docs, one for the x250, the other one for the x290. However bear in mind that the document was issued a couple of years before you van has been produced.

2020 might be a milestone year when they again changed many things (new engines, probably also gearbox change).

Thanks for pointing the manuals out, look like very useful documents!

@nickmair pg93 in the X250 manual is what you need.