Technical Propshaft

[Harvie]

thanks to Koalar for heads up, posted on wrong thread

Fiat Panda Propshaft 4x4 (169) 2004-ON 55222107 55193595 55197051 55264146 | eBay

OE Numbers: 55193595, 55197051, 55222107, 55264146, 0055264146, 0055197051, 0055193595, 0055222107. PANDA MK 2 HATCH (169). 169 A4.000. 1.3 D Multijet 4x4. 169 A1.000; 169 A5.000. PANDA VAN (169_). PANDA VAN (312_, 519_).

www.ebay.co.uk

Looking if anyone can help in confirming this will fit
Panda cross 2015 diesel
NL65 UBS
And can i run it in 2 wheel drive while waiting fix?
Answers appreciated

 

[the green vanper]

Hello,

On the bottom of the forum banner you've got a link to ePER, it's a FIAT spare parts catalogue. You can browse by models and categories, but also search by VIN (which will show you only the correct part numbers) or by part number, then check on which models the part was used.

Should be helpful in your case.

The search windows is top left of the screen.

 

[Harvie]

Hello,

On the bottom of the forum banner you've got a link to ePER, it's a FIAT spare parts catalogue. You can browse by models and categories, but also search by VIN (which will show you only the correct part numbers) or by part number, then check on which models the part was used.

Should be helpful in your case.

The search windows is top left of the screen.

 

[Harvie]

Thanks will do that soon

 

[Eltezz]

The propshafts are all the same across the Panda range. Fiat introduced different numbers through the years but they all fit.

With regards to your ebay listing, I had a bad experience when I purchased one from there (different seller). The fit was poor, the joints at either end were very stiff and when I road tested the car the vibration made it undriveable. Clearly not balanced properly. I had to go though the hassle of removing it and sending it back for refund. In the end I paid £90 more and purchased from a propshaft specialist in Wolverhampton. The quality, fit and balancing were far superior to the ebay part, money well spent.

Hopefully you will have better luck than me...

 

[Pedigrine]

You can drive with propshaft removed.I did on mine while mine was being repaired.

 

[BopBopBop]

thanks to Koalar for heads up, posted on wrong thread

Fiat Panda Propshaft 4x4 (169) 2004-ON 55222107 55193595 55197051 55264146 | eBay

OE Numbers: 55193595, 55197051, 55222107, 55264146, 0055264146, 0055197051, 0055193595, 0055222107. PANDA MK 2 HATCH (169). 169 A4.000. 1.3 D Multijet 4x4. 169 A1.000; 169 A5.000. PANDA VAN (169_). PANDA VAN (312_, 519_).

www.ebay.co.uk

Looking if anyone can help in confirming this will fit
Panda cross 2015 diesel
NL65 UBS
And can i run it in 2 wheel drive while waiting fix?
Answers appreciated

Harvie,
I just had my 2017 4x4 Twin air propshaft changed two days ago. The center rubber bush had perished.

I got the replacement shaft from Des Shelley £275 and then £78 for fitting at my local fiat specialist.

I was told there was no difference in the propshaft between the diesel and petrol cars, but give them a ring to confirm.
Delivered next day direct to the workshop.

I was worried about getting a substandard part from ebay so I ordered from a propshaft company.

I think the prop shaft may still turn even if ELD is not engaged?
There must have been a slight noise from the old rubber bush as the car is now quieter with the replacement shaft,

FIAT PANDA MK2 4X4 PROPSHAFT Brand new 55193595 55197051 55222107 55264146 46349688

FIAT PANDA MK2 4X4 PROPSHAFT Brand New Replaces OE Part numbers 55193595 55197051 55222107 55264146 Contact us with your registration number for fitment details. 12 MONTHS PARTS ONLY WARRANTY FOR FURTHER INFORMATION PLEASE CONTACT US 01902 771969 DELIVERY TO SCOTTISH…

desshelleyshafts.com

 

[Eltezz]

This is the company I bought mine from as well so thumbs up

 

[SiloSean]

I replaced mine in October, paid £300 from propshaftrepairs.com, the webpage for DriveLine and Hydraulic Engineering. They also sell through eBay. It was a new unit, came with the centre bearing, fitted perfectly to my 63 plate 4x4 mjet. They told me the propshafts are the same on all pandas, but just ask them if you're not sure.

I had help from my brother to fit it, we didn't even jack the car up, just reached everything from the sides, rolled the car on it wheels turning the shaft to gain access to the bolts.

 

[Herts Hillhopper]

...I think the prop shaft may still turn even if ELD is not engaged?

The prop shaft is rotating any time the wheels are, even if the system is not 'calling for' four wheel drive

Pressed the ELD button does not alter that, but does force 4x4 drive (rather than the default setting of 'auto'). The full description of how the 4x4 system works can be found in another thread...

 

[Harvie]

All back up and running. Ran 2wd for a week then got new propshaft from Vantastic on bay.
Thanks for all input