endrop - for all your online needs

FREE to try Fiat diagnostic software

Currently reading:
FREE to try Fiat diagnostic software

Re: FREE Fiat diagnostic software

Hi I've got USB 409.1 KKL VAG-COM OBD 2 II do I need to modify it to work with the other parts of FiatEcuscan (ABS,airbag,Elctric steering,Dashboard,Body,Serviceand Other)Works fine with the Engine just when I try to use the rest will no let me?
Thanks
 
Re: FREE Fiat diagnostic software

You will need The ELM cable. You will also need the VAG cable for Air Bag reset. You can buy a VAG cable with a switch that will allow you to access various options in the Fiat ecu scan program. These are on Ebay. But cost about £30 including postage.
 
Re: FREE Fiat diagnostic software

Guys just bringing this thread back to life. Can anyone tell me if this diagnostics will work on a 04 ulysse? I don't see it listed but perhaps it will work? Also if i was to buy it what connection cable would i need? I know nothing about all this stuff but would love to have a go at plugging the car up and maybe fixing the odd gremlin rather than head to a garage all the time.
 
Last edited:
Re: FREE Fiat diagnostic software

Tombomb said:
Guys just bringing this thread back to life. Can anyone tell me if this diagnostics will work on a 04 ulysse? I don't see it listed but perhaps it will work? Also if i was to buy it what connection cable would i need? I know nothing about all this stuff but would love to have a go at plugging the car up and maybe fixing the odd gremlin rather than head to a garage all the time.
Click to expand...


Contact the FES Forum - yani
he might be able to help

Can't see why not tho - another car/van with same ECU, cant use that setting to connect

And FES website tells you which cables will be needed for all cars, but as mentioned cant see ulyesse

Ziggy
 
Re: FREE Fiat diagnostic software

yani said:
Current version works only with K-line cables (KKL, VagCom).
ELM 327 is not supported.
Click to expand...
i have punto which was first registred in may 2000 which code reader will work on it
 
Hi there i have a Elm 327 with the changable coloured leads. Red,yellow,green. Once ive scan the ECU with the red cable attached. Want to remove airbag light. A pop up window appears saying

You need a K-Line/Vagcom/OBDKey interface to connect to this module
Check your cable and serial Settings!

Ive chacked serial settings and im on com11

Is it one of these i now need
http://cgi.ebay.co.uk/ws/eBayISAPI.d...ht_2573wt_1185

My punto is a 2001 Mk2 1.2 16v Sporting 6speed box
 
This post contains affiliate links which may earn a commission at no additional cost to you.
latency too high problem with fes 3.3 found a few thread on fes forums on this but no fix :(

any fix for this yet?
fiat croma 1.9 16v
laptop running win xp
latency too high,
port set at 1
trying to do steering wheel calibration, it fails says conditions incorrect

cant down grade to an earlier version of fes, unless maybe i uninstall 3.3 first, but cant remember where my code is so may have to pay again :(
 
Re: FREE Fiat diagnostic software

Folks,

Recently changed the lockset, engine ECU and Code ECU, with ignition antenna etc - on my Sei... Will this software work on my car??

I've an engine management light on....??

Cheers

Jon :eek:
 
You must log in or register to reply here.

Similar threads

icheatatscrabble
Fiat Dealer Moves to Vauxhall
Replies
8
Views
190
icheatatscrabble
icheatatscrabble
8
coming from yaris to fiat bravo/punto
Replies
6
Views
600
8bit
8
T
Please help, trying to find out what these are!!!
Replies
6
Views
839
s130
s130
F
Hiring a Fiat Panda to drive the Targa Florio
Replies
5
Views
818
SB1500
SB1500
porta
Free stuff
2
Replies
25
Views
1K
varesecrazy
V
Back
Top