- Joined
- Sep 12, 2003
- Messages
- 46,059
- Points
- 7,134
Re: Stilo connect nav setup disk
Or you could have just PM'd me!!!
Or you could have just PM'd me!!!
Technical Connect NAV+ 9.8 Update CD & Setup CD
- Thread starter peterdif
- Start date
Currently reading:
Technical Connect NAV+ 9.8 Update CD & Setup CD
Hi
I download this file fiat_stilo_cd_setup.zip from Max2950 post and I have one question. Can I use it to my old CN (mono version) ? I need change language only (italian --> english). Please help me :worship: my english is bad but italian is worse!
I download this file fiat_stilo_cd_setup.zip from Max2950 post and I have one question. Can I use it to my old CN (mono version) ? I need change language only (italian --> english). Please help me :worship: my english is bad but italian is worse!
ROBINHOOD28
New member
Hi,
I am writing from Turkey.
There is no stilo which has CN+ ( connect,connect nav and radyonavigator) in Turkey.
I've bought CN+ from France.
Is there a module or coaxiel cable between CN+ and antenna ?
Is the fw ver. 9.8 the latest version ?
If it's not, is it possible to send me the download link .:worship:
I'll be very pleased because it 's not possible to found the new version in Turkey.
I want to know that is there another CD setup to use the CN+.
If there is, is it possible to send me the download link .
thanks a lot.
I am writing from Turkey.
There is no stilo which has CN+ ( connect,connect nav and radyonavigator) in Turkey.
I've bought CN+ from France.
Is there a module or coaxiel cable between CN+ and antenna ?
Is the fw ver. 9.8 the latest version ?
If it's not, is it possible to send me the download link .:worship:
I'll be very pleased because it 's not possible to found the new version in Turkey.
I want to know that is there another CD setup to use the CN+.
If there is, is it possible to send me the download link .
thanks a lot.
There are probably no Stilos with CN+ in Turkey because there is no map disc available for the CN+ for Turkey.
It is very difficult to fit a CN+ to a car that does not have it as standard. There's a guide how to do it here;
https://www.fiatforum.com/stilo-guides/70692-connect-nav-installation.html
Firmware version 9.8 is the latest available in the UK but I have seen a referrence to version 11.3 on the Dutch Stilo site.
Dave.
It is very difficult to fit a CN+ to a car that does not have it as standard. There's a guide how to do it here;
https://www.fiatforum.com/stilo-guides/70692-connect-nav-installation.html
Firmware version 9.8 is the latest available in the UK but I have seen a referrence to version 11.3 on the Dutch Stilo site.
Dave.
ROBINHOOD28
New member
1.Even though I have tried everything, I haven't updated the firmware 9.8.
How can I do ?
2.For using the telephone what type of microphone is neccessary ?
Which qualities must be at the microphone ?
Thanksss.
:bang:
How can I do ?
2.For using the telephone what type of microphone is neccessary ?
Which qualities must be at the microphone ?
Thanksss.
:bang:
There's a sticky at the top. Have you read it ?
ROBINHOOD28
New member
what do you mean ?
I don't understand ?
Do you mention from top of the CN+?
I haven't seen anything top of the CN+...
please help me to solve my problem.
Dose the CN+ need special microphone unit or a simple mic. is enough for it.
I don't understand ?
Do you mention from top of the CN+?
I haven't seen anything top of the CN+...
please help me to solve my problem.
Dose the CN+ need special microphone unit or a simple mic. is enough for it.
I mean the posts at the very top of this Forum
Have you read the guide as I suggested above? The answer is there on page 5.
Dave.
ROBINHOOD28
New member
thanks.
ROBINHOOD28
New member
Last edited:
- Joined
- Sep 12, 2003
- Messages
- 46,059
- Points
- 7,134
Which can also be found here:
https://www.fiatforum.com/stilo-guides/67187-connect-nav-software-update-gars4.html
ON a post dated 18th June 2006!!!
ROBINHOOD28
New member
you are right,
I didn't see ...
firmware 11.3 or 9.9 download ???
I didn't see ...
firmware 11.3 or 9.9 download ???
soulgiannis
New member
Hello
I Tried to do update to ConnecNav+ but it failed.
The original version was 6.6 i follow the instraction's and to 40% stopped.
I read all the ways to do the upgrade but allways stuck to 40% and the cd can't eject.
I finally eject the cd but another copy of the cd to make happens again.
Can i do something for this because the Navi it has stack to a black screen.
I Tried to do update to ConnecNav+ but it failed.
The original version was 6.6 i follow the instraction's and to 40% stopped.
I read all the ways to do the upgrade but allways stuck to 40% and the cd can't eject.
I finally eject the cd but another copy of the cd to make happens again.
Can i do something for this because the Navi it has stack to a black screen.
Try alfaowner.com , there are discussions over there about upgrading various satnav units in the alfa. Do not use the CD from this link, I doubt if it would work at all,
Dan
Dan
ROBINHOOD28
New member
Connect Nav+ for firmware 11
http://rapidshare.com/files/259659166/majCN11.rar
http://rapidshare.com/files/259659166/majCN11.rar
ROBINHOOD28
New member
Dear Robin Hood, I've the same problem on my connect nav... cd stucked in and black screen... what have you done? Good news?
Many thanks
Francio
I don't now
