Uno Cant feel my clutch

[Nalin007Aust]

Hello everyone, trust all is well,
Please help me please,
I have a Fiat Uno Mia today in the morning went to start my car she started up well, but when i tried to put it in reverse she didn't want to go into reverse at all or any other gears,
I then after work was told it is the Slave Cylinder which i then went to buy and changed it Bleed it as well and bumped through clutch,
But still nothing at all the Master Cylinder is fine,

The Lever that the Slave Cylinder goes into is loose and doesn't move at all when i pump my clutch??

Please can anybody give me advice and point me in the correct direction please this is very urgent, thank you very much.

 

[varesecrazy]

Hi

The Panda will have a very similar system..and MUCH more info in the Panda section

https://www.fiatforum.com/panda-classic/142341-problem-gear-changes.html?142341=#post4138298

Charlie

 

[Nalin007Aust]

Thank you varesecrazy

 

[johorridoh]

You asked me for help.
Only the right hand steered cars have hydraulic clutches.
The standard version has a cable opperated clutch.
Sorry

 

[Nalin007Aust]

I have a right hand drive car

 

[varesecrazy]

I have a right hand drive car

Yes..and @80% of Uno are LHD

I was forgetting the UK stopped using the Panda until the New Panda in 2004

So @8 years .. the 2004 panda was the same tech as an Italian model 2000 panda I had.

MPI..Manicat and hydraulic clutch