Technical Brava Door 'Bolts'

[invader84]

The drivers door on my Brava is missing a couple of bolts on the 'returner' mechanism that keeps it open. As such, it flaps in the wind a bit.

Iv provided some pics, just wondered if anyone could identify the type of bolt required as I don't have the faculties to measure up myself.

Many thanks in advance.

 

[Adrian Bravo]

Its an M6x14mm cap head bolt

The washer Is 15mm Diameter and 1mm thick so best I can tell it does not conform to the standard form sizes.

I guess I would get a Form D M6 Washer 0.8mm Thick and 14mm Diameter

http://www.nutsaboutbolts.org/formd.html.

You cant remove the washer from the Fiat Bolt since the thread is formed after the washer is put on.

 

[Adrian Bravo]

This is what the check strap looks like. If you need to remove it you remove the door card then the speaker. A lot of different Fiats and alfas have them fitted if you need to go scrap yard hunting but saying that watch out for very similar looking yet different ones .