Technical 2016 Fiat Ducato X290 DPF lost

Currently reading:
Technical 2016 Fiat Ducato X290 DPF lost

PapyPachy

New member
Joined
Mar 25, 2025
Messages
3
Points
27
Location
France
Hello everyone, I bought in fiat ducato 2.3l 130CH in June 2024. but I just start to ride with for 2 months.
I now have a very significant power loss. after a long investigation, it is the DPF that is blocked.
When analyzing the differential pressure sensor in MULTIECUSCAN, there is no data.
With ALFAOBD I have the message like not taken into account by ECU.
The same is true for DPF temperature sensors: they do not appear.
Screenshot_2025-03-23-17-00-33-152_com.AlfaOBD.AlfaOBD.jpg


By connecting to the Body ECU I went to see the configuration of the vehicle and the DPF was "desable".
I changed it to "ENABLE".

Screenshot_2025-03-23-16-57-38-140_com.AlfaOBD.AlfaOBD.jpg

Now the Body ECU is informed of the presence of the DPF.
Unfortunately I still do not have information of the DPF pressure and temperature captors that go back to the engine ECU. Apparently the engine ECU still does not know that there is a DPF .
How do I tell him?

Do I need to realign the PROXI or reset learning or something else that I don’t know?
 
Short answer, i dont know, this is a new one on me (almost) have you actualy succesfully run it and itis just now playing up?
A new proxi align is a good idea but make a backup first. Is it possible that it has had a remap with the dpf deleted (guts removed) and as a result the differential dpf sensor is either mapped out or reading correctly in that there is no difference.
 
Thanks theoneandonly the proxy realignment didn’t give anything, everything was ok.

I think the previous owner had remap.

I would have to go back to the original state, but I don’t know how to do it.
 
Back
Top