Styling mk1 interior
- Thread starter jonyid
- Start date
Currently reading:
Styling mk1 interior
Hi Jon, they are very very easy to remove. Get a very flat screw driver (Wrap a thin cloth round it if you don't want to damage the surrounding surface)
And pry it from the top right and top left and ease it out.
Remember before you spray it to clean it up as much as you can. Wet and Dry 1200 paper will be great to do this with
And pry it from the top right and top left and ease it out.
Remember before you spray it to clean it up as much as you can. Wet and Dry 1200 paper will be great to do this with
Thats what I did. But again, looking back I wish I had have sanded them ever so lightly with a very fine wet and dry. They turned out great but still. I never realised and though I was spraying straight onto 11 year old plastic
yeah true mate, i might try and do like the bit you will see lightly will see how it goes, how about the vents above the centre console, same concept as the side vents?
i'm going to go to a punto-only breakers soon and get a sporting centre console just to make it look better
i'm going to go to a punto-only breakers soon and get a sporting centre console just to make it look better
Sporting? Did you mean GT? As far as I am aware I thought the Sporting and S model are the same? in terms of centre console
on the mk2 there easy
puntosportuk
New member
- Joined
- Sep 24, 2005
- Messages
- 18
- Points
- 10
I have a sporting one which I am getting rid of which is exactly the same as you would get in a GT, all sportings came with it.
Middle vents are real easy to take out as are the heater controls.
Middle vents are real easy to take out as are the heater controls.
are you breaking or selling? if you're breaking i'm interested in the centre console etc
sand it first. this is mine afer sanding ( bear in mind the whole dash ahs been sprayed)
well the wents arnt in there but there the same principal. make sure you dont do it to thick or they will clog up the moving parts.
hope this helps.
***Cj***
well the wents arnt in there but there the same principal. make sure you dont do it to thick or they will clog up the moving parts.
hope this helps.
***Cj***
