Technical rear seat belts
- Thread starter gordinir8
- Start date
Currently reading:
Technical rear seat belts
AndrewHarvey
Established member
- Joined
- Jan 17, 2015
- Messages
- 1,471
- Points
- 290
I've fitted reel inertia in rear. Quite a bit of fun. There are specific brackets with captive nuts available - these are not car make specific - just general car seat belt brackets.
I have placed the reels on the rear parcel shelf - very neat installation if I do say so myself. I used fabric stalks for the buckle strap and all looks great. All in cost £50
I have placed the reels on the rear parcel shelf - very neat installation if I do say so myself. I used fabric stalks for the buckle strap and all looks great. All in cost £50
Ah a timely thread!
Can I ask, and perhaps g8 is wondering the same, how one fixes the bits under the seats?
I assume the belt goes between the rear seat and bottom seat segments, but how do they bolt into the chassis?
Can I ask, and perhaps g8 is wondering the same, how one fixes the bits under the seats?
I assume the belt goes between the rear seat and bottom seat segments, but how do they bolt into the chassis?
AndrewHarvey
Established member
- Joined
- Jan 17, 2015
- Messages
- 1,471
- Points
- 290
One bolt through rear "parcel" shelf - bolts slid through the 2" hole behind seat back
One bolt through fire wall at lowest extremity for the "pivot" and one more centralised bolt for buckle
One bolt through fire wall at lowest extremity for the "pivot" and one more centralised bolt for buckle
AndrewHarvey
Established member
- Joined
- Jan 17, 2015
- Messages
- 1,471
- Points
- 290
That's correct
