Technical Seatbelt signs

[EValerio]

Hi everyone, My first post in this Forum! I recently bought a 2013 Fiat Panda 4x4 1.3 MJET with 135k miles with an initial plan to be a kind of 'gap' car while my AR Stelvio is being sorted (long story). I bought it with a few 'gremlins' as the price was quite reasonable. I did minor service also EGR was replaced, and other things were cleaned. So far, all good runs well, and it's a keeper.

I’ve noticed that the seatbelt warning signs on the dash don’t seem to be visible. Is this normal for this model, or is it something I should look into?

Any advice or thoughts would be much appreciated!

 

[Herts Hillhopper]

It (they) should be there! There have been a few posts about bits of the digital display failing. Do you see everything else? (Photo of mine from a little while back to show most of the rest of the display. If the headlights were on, beneath where it says ‘settings’ there’d also be a headlight symbol and a number next to it to show the setting of the headlight leveller). I don’t know if you can ‘programme out’ the seatbelt warning via MES.

 

[Panda IIs]

It (they) should be there! There have been a few posts about bits of the digital display failing. Do you see everything else? (Photo of mine from a little while back to show most of the rest of the display. If the headlights were on, beneath where it says ‘settings’ there’d also be a headlight symbol and a number next to it to show the setting of the headlight leveller). I don’t know if you can ‘programme out’ the seatbelt warning via MES. View attachment 455563

You need to get that external temperature sensor looked at...

 

[EValerio]

Apologies, I've found it! It is working as expected... I simply overlooked it as not familiar with this car yet!