Technical Relays

[Pm3010]

Hi guys, I was trying to locate the starter relay (don't ask) by removing 1 then turning the key till I find the one so the starter doesn't operate, but now I have the Abs light on, the code reader shows now codes, on scanning the light goes off and comes back on 5 secs later.
Any ideas what I've caused please?

 

[Communicator]

1. Vehicle details?
2. AFAIK on x230 red base, while on x244, and x250, no such relay.

 

[Pm3010]

Hi guys, I was trying to locate the starter relay (don't ask) by removing 1 then turning the key till I find the one so the starter doesn't operate, but now I have the Abs light on, the code reader shows now codes, on scanning the light goes off and comes back on 5 secs later.
Any ideas what I've caused please?

It's a 2009 ducato

 

[Communicator]

An x250 model. See attached. The only copy that I have is exforum, and hard to read in detail.

I did something similar when checking relay coil polarity on my x244. Alarms reset with code reader.

I am not an expert on the x250, but it seems possible that you have upset the proxi alignment, as regards the ABS.