Hello all. 2018 fiat 500x with blanks under the door panel where puddle lamps would go, there is wiring there but they do not seem to have power. Ordered some online and was hoping for plug and play. Anyone know where the wires should get power?
General Puddle lamp 2018 500x
- Thread starter 1jwhite
- Start date
Currently reading:
General Puddle lamp 2018 500x
Hi,
On other Fiat's kit is often variable, a supply looking viable in the wiring loom, but the lowest of the 5 fuse board options is factory fitted, so no chance of direct power
Your handbook/manual probably states "If Fitted" for some of the fuse board items
On other Fiat's kit is often variable, a supply looking viable in the wiring loom, but the lowest of the 5 fuse board options is factory fitted, so no chance of direct power
Your handbook/manual probably states "If Fitted" for some of the fuse board items
Background information:
www.fiatforum.com
Panda - How to install an original 12v power socket in a Fiat Panda
This thread is for the general discussion of the Guide How to install an original 12v power socket in a Fiat Panda. Please add to the discussion here. 50p submitted a new guide: How to install an original 12v power socket in a Fiat Panda I’ve just been getting a 2009 Fiat Panda 1.3 Multijet...
www.fiatforum.com
The Puddle lights are driven/controlled directly via the Body Computer (BCM)
They will most probably need activating in the BCM.
They will most probably need activating in the BCM.
Do you know if there are varying BCM options,
(Like my frustrating attempts to upgrade my Cruise Contol.. " wrong option of kit"
)
The BCM is in many respects a mystery. Being essentially a computer controlled unit then different firmware can be installed. Whilst if you like it has say x I/O lines plus the various CAN and serial interfaces what they can all do it determined by a) the version of the BMC and b) the installed firmware. On top of this you have the infamous PROXY confirguration when bytes within a control block determine what is supported and specific functions.Do you know if there are varying BCM options,
(Like my frustrating attempts to upgrade my Cruise Contol.. " wrong option of kit"
I'm not an expert on changing vehicle configurations and functions however there appear to be people who do this with varying degrees of success.
My thoughts are that if your model and year of car supported say cruise control from the factory for some and not others then if one gets the steering wheel/controls for the same model and year then the BCM should support the function. Doing a PROXY alignment may just automatically enable that cruise control function OR it may require a CUSTOM configuration by changing certain bytes.
As for after market kits then again it can be a hit/or miss journey so with these a respected decent supplier with after market tech support is to be preferred.
Certainly the MES forum has many post regarding doing these tpye of upgrades / configs. There is also ALFAOBD and there are forums where these types of changes are discussed.
On my 500X I'm happy with the uConnect 5" others are not and rip it out and put uConnect 7" or other makes of head units in with Carplay etc. Some are successful in doing this. Others get the basics working but not all functions and all menus. I doubt I will ever attempt this unless my uConnect packs up.
Well these modern computer driven vehicles from any manufacturer really really WORRY ME.
In theory a manufacturer in the EU is supposed to support a vehicle for AT LEAST 10 years. F that. Fiat gave up spport for the Strada 130TC less than a year after the last model was shipped.
With the likes of the Strada and othe 19XX and possibly early 20xx model then support is a "want" and not a "requirement".
Come the 2010, 2015, and later with all these modern computer "digital configurations", rapidly week by week, month by month changes I have no confidence Fiat or any other manufacurer will "guaranteed" support you vehicle 5 years after production date. Worse still the technical, computer, technical details are "closed proprietry" information so not available.
In the old days if something mechanical broke you could fix it, bodge it, or make replacement components yourself. This avenue is not really available to owners anymore..
Whilst there are companies that can hack / reproduce modern electronic vehicle components their business are driven by commercial viability. To this read NUMBERS. Sadly Fiat in the UK is only a very very small member of the market and even less so to those that can "fix it".
Time to build a simple steam engine or get a horse or donkey for your travels!
In theory a manufacturer in the EU is supposed to support a vehicle for AT LEAST 10 years. F that. Fiat gave up spport for the Strada 130TC less than a year after the last model was shipped.
With the likes of the Strada and othe 19XX and possibly early 20xx model then support is a "want" and not a "requirement".
Come the 2010, 2015, and later with all these modern computer "digital configurations", rapidly week by week, month by month changes I have no confidence Fiat or any other manufacurer will "guaranteed" support you vehicle 5 years after production date. Worse still the technical, computer, technical details are "closed proprietry" information so not available.
In the old days if something mechanical broke you could fix it, bodge it, or make replacement components yourself. This avenue is not really available to owners anymore..
Whilst there are companies that can hack / reproduce modern electronic vehicle components their business are driven by commercial viability. To this read NUMBERS. Sadly Fiat in the UK is only a very very small member of the market and even less so to those that can "fix it".
Time to build a simple steam engine or get a horse or donkey for your travels!
