Vaman
New member
I am not getting any readings from the sensor, except a brief 3V on one occasion and 12V on another, these values are from Multiecuscan. It looks like I need to replace the module and sensor as they are a single item on the 2021 2.3 Maxi 35.
My question is will I need to align afterwards, as I found on seller stating it is not required. The SGW is in the BCM on my van so things could get awkward if alignment is required. Thoughts please.
My question is will I need to align afterwards, as I found on seller stating it is not required. The SGW is in the BCM on my van so things could get awkward if alignment is required. Thoughts please.