General New weels are these possible?

[jhreekers]

Hi all,

I am from the netherlands but there is not
good forum about the fiat punto so i ask it here.

1: I have a punto HGT from 2000 and ik like new
wheels. i have seen weels with this spec. 6,5x16 4x98 et 41
does anyone know if this weels are possible to fit
at my punto.

2: Is it possible to swap the tire's from my old weels at the new
These are 16"-205-45

greets Johan

 

[custard]

think the offset could be a problem but punto guys will confirm/advise

 

[StoneNewt]

16xJ6.5 is do able, PCD is fine but the nominal offset is et37 so you may need a spacer. A bit of outer-arch work probably will be required on any kind of drop but I wouldn't expect much more than rolling.

 

[dave]

same off set as me. i use 5mm spacers on the front, and 8mm spacers on the back, you will need the longer bolts too.
http://www.performancefx.net/wsfiat.htm

avoid type 13 spacers

 

[jhreekers]

thnx for the answers.

I think that i dont buy this weels I like wheels with a smaller
offset.

here some pics off my car

 

[crazydave]

as dave says them sort of spacers should be fine and thats one nice looking punto, i like the seats

 

[x Alex x]

i like the rear light covers, they available for the 5 door? thanks.

 

[jhreekers]

Rear light covers are availeble for the 5 door

the are from Mattig
in germany is a web store that sell it italo-tuning