General Manual to Electric Wing Mirrors

[DB23]

Hey All,

Firstly, apologies if this has already been answered (If someone could point me in the direction of the post if this is the case, that would be fantastic.)

I am looking at changing my manual wing mirrors in my 2013 Panda Easy and was wondering if there is a way I can change them to electric ones, and where I would put the adjustment switch within the car?

Any help would be much appreciated.

Cheers.

 

[varesecrazy]

Hey All,

Firstly, apologies if this has already been answered (If someone could point me in the direction of the post if this is the case, that would be fantastic.)

I am looking at changing my manual wing mirrors in my 2013 Panda Easy and was wondering if there is a way I can change them to electric ones, and where I would put the adjustment switch within the car?

Any help would be much appreciated.

Cheers.

Hi.

It would all depend on the level of wiring already fitted to YOUR PANDA

Thinking of things as mundane as the 12v power socket.. there were @7 levels of electrical preparation.

So simple answer.. probably not..

Nothing is impossible..
for @£400 you can have cruise control..

so maybe the mirrors would be simpler.

 

[Herts Hillhopper]

Hey All,

...wondering if there is a way I can change them to electric ones, and where I would put the adjustment switch within the car?...

If it were possible to simply replace the manual mirrors and the corresponding trim piece on the inside of the door, then the new trim piece for the driver's door would have the electric control knob on it already. I woudl expect the wiring loom from the door pillar to the inside of the door to already have the necessary wires in it, but the loom inside the car may not.
Parts are listed here, with approx dealer price in Euro https://www.fiatdalys.lt/en/catalog...7M051870/ZFA31200003210975/0/0/0/wing-mirrors
and here for the door wiring loom https://www.fiatdalys.lt/en/catalog...70/ZFA31200003210975/0/0/0/front-door-harness

I have never once adjusted my mirrors apart from when I first got the car... so unless you need to do this frequently, it might be an expensive exercise

 

[chris3234]

If it were possible to simply replace the manual mirrors and the corresponding trim piece on the inside of the door, then the new trim piece for the driver's door would have the electric control knob on it already. I woudl expect the wiring loom from the door pillar to the inside of the door to already have the necessary wires in it, but the loom inside the car may not.
Parts are listed here, with approx dealer price in Euro https://www.fiatdalys.lt/en/catalog...7M051870/ZFA31200003210975/0/0/0/wing-mirrors
and here for the door wiring loom https://www.fiatdalys.lt/en/catalog...70/ZFA31200003210975/0/0/0/front-door-harness

I have never once adjusted my mirrors apart from when I first got the car... so unless you need to do this frequently, it might be an expensive exercise

Maybe he wants the headed mirrors more then adjustment
Well unless they are already heated just not adjustable

 

[varesecrazy]

Maybe he wants the headed mirrors more then adjustment
Well unless they are already heated just not adjustable

They didnt mention heat though.

If you have got a 4'6" driver.. and a 6"6" driver.. then the tall one could reach the nearside mirror.. to LOWER IT

But the smaller driver couldnt reach to raise the lens up..

 

[Herts Hillhopper]

I think electric mirrors can be had without heat, but don't believe you can have heated manual mirrors.

 

[A3jeroen]

I think it won't work without the right bodycomputer. Might be expensive.

gr J