General Jacking points

[madmaxx]

I'm gonna be doing some work on my 04 multi jtd.
I want to use my trolley jack as I don't like the scissor ones that come with the car.
Does anyone know best place to use the trolley jack on the car. Need front and rear trolley jack locations. Also where's best place to put axle stands on it.
Cheers

 

[Most Easterly Pandas]

Front and rear sub frame is what I use for jacking and axel stands on all of our cars

 

[pete123]

Front I jack up at the back of the wish bone on the bolts and axle just behind it as for rear jack just under suspension and I've never axled back but looking its tight bit can be done on the bottom of the suspension plate or rear traing arm if. There not to fragile not 100 per cent with rear though

 

[madmaxx]

There is some bumps either side under the drivers door on the main chassis that look like jacking points.
My trolley fits nice on them to.

 

[boilermansab]

Yep..I use them too..

 

[madmaxx]

Just done front track rod ends.
Old ones where a real bugger to get off.
Got rid of the knocking at the front.
There is still a small knock at the drivers side front when going over rough surfaces.
Anyone any ideas.
Wheel bearings seem ok. Drop links ok. Front arms ok.
Thinking maybe top of strut..

 

[boilermansab]

Anti roll bar bush...

 

[madmaxx]

Think you're right.
Just ordered them of ebay from Portugal.
Cheers

 

[boilermansab]

You will Be amazed how worn the old ones will be...
You will need a chisel or a strong fairly large flat heat scredriver to split the bracket..**** easy job though