Technical Fuse puller

Currently reading:
Technical Fuse puller

Joined
Apr 26, 2011
Messages
2,102
Points
358
The yellow fuse tweezers (puller) fell out from behind the drivers side of the dash last week, but I can't seem to find where they should be clipped in!

This post https://www.fiatforum.com/showthread.php?t=165440 appears to reference a couple of photo's which might answer my question, does anyone else have knowledge of where it should be? I tried pulling off the little pocket near the A post that hides the diagnostic socket, but can't see where the fuse puller goes..

Thanks in advance!
 
Pull off the panel which covers the diagnostic socket - the fuse puller just clips loosely to another bit of panel behind it. It's free to slide along horizontally - bit of a naff design IMO.

Much easier to show with a picture than to describe - so I've attached one. Just click to enlarge.

AFAIK this is in the same position as it was in when the car left the factory.
 

Attachments

  • 500 Fuse Puller.JPG
    500 Fuse Puller.JPG
    95.4 KB · Views: 889
Last edited:
Ahh! I was thinking it went in a proper place, I had that cover off and was trying to find a little peg for it to fit on etc.

Thanks for the pic - that explains why it fell off and appeared in my footwell :)
 
Back
Top