General engine options for panda

[smokeme]

I also think it bolts up, but was told it wouldn´t. I do know it won´t hold the power of the turbo long, mine sure didn´t[}].

If you have any questions don´t be afraid, ask away. I´ll be glad to help.

 

[smokeme]

I now have info stating that it´s possible to fit a pre-1990 Uno turbo engine into a panda with just some hood modifications(maybe mounts too). It´s a 1301cc engine(nonfire), this is the same engine we discovered in my panda 55 only mine is non turbo (it has high compression pistons fitted)

_____________________________________________________________
If you have any questions don´t be afraid, ask away. I´ll be glad to help.
If i´m online you can try my site, it´s mostly storage http://www.smokeme.ipupdater.com/everything

 

[Nacho]

Well bad news for me. I have looked around at a few junkyards and everyone said that they dont have Y10 turbo motors. Also, I was told at every junkyard that they are rare and hard to find. I may have to start looking elsewear for a motor. I am glad to hear there is more possibilities for an engine swap. How rare are 1.3 Uno turbos. I may have to just go to the junkers and try all the Fiat/Lancia engines till I find one that works. If I find anything else out I will put it here.
Nacho

 

[smokeme]

I only know 1 1988 Uno turbo fitted with a 1.3(1299cc/1301cc same as the Y10 gti), i do know they were only briefly available around here. I´m now looking for the 1116cc engine for measurements as i was told it should also fit, anyone else know about this?

_____________________________________________________________
If you have any questions don´t be afraid, ask away. I´ll be glad to help.
If i´m online you can try my site, it´s mostly storage http://www.smokeme.ipupdater.com/everything

 

[Martiny10]

The Y10 turbo was 1049 CC, the non turbo GTi.e. was 1301CC.

The most widely available bolt in option is the Cinq Sporting engine(or find a carbed Uno Version - even easier)

It's the 1108CC engine, as used in the automatic. Will use the same clutch and gear box, only downside is it's not a lot of horsepower extra.





Fix It Again Tony!
Would swap for X19, Montecarlo Spider or GT.i.e in average/poor condition! Scottish based would be nice.

 

[smokeme]

I´m basically looking at all the options. I´m trying to cram(fit is not the word) a 1242cc 16V MPI engine off a punto into a Panda, that´s my definition of a hard swap and makes anything else look easy

_____________________________________________________________
If you have any questions don´t be afraid, ask away. I´ll be glad to help.
If i´m online you can try my site, it´s mostly storage http://www.smokeme.ipupdater.com/everything