Technical Coolant hose 04 jtd

[unclepops]

Hi I'm really struggling to find the correct hose for my 04 1.9 jtd ..the one I'm after goes from the coolant hose junction And connect's above the oil filter it has a different size at the oil filter end any help appreciated I've used generic by the meter hose but can't get a proper seal because of the size reduction at the oil filter and

 

[varesecrazy]

Hi

Look on the forums ePER

To get the correct part number

 

[Communicator]

Hi I'm really struggling to find the correct hose for my 04 1.9 jtd ..the one I'm after goes from the coolant hose junction And connect's above the oil filter it has a different size at the oil filter end any help appreciated I've used generic by the meter hose but can't get a proper seal because of the size reduction at the oil filter and

I am not aware of a 1.9jtd engine. According to Wikipedia the 1.9TD was not an option post 2001.

The 2.0jtd was an option for x244 models from 2002 to 2006.

May I suggest that you confirm which engine, you seeking the pipe for?

 

[unclepops]

I am not aware of a 1.9jtd engine. According to Wikipedia the 1.9TD was not an option post 2001.

The 2.0jtd was an option for x244 models from 2002 to 2006.

May I suggest that you confirm which engine, you seeking the pipe for?

Ah okay my bad I've only had 7 year's And took 100cc of her so a very pedantic 2.0jtd

 

[Communicator]

Ah okay my bad I've only had 7 year's And took 100cc of her so a very pedantic 2.0jtd

You were being conservative with the engine size.

When you have obtained the correct part number via ePER, try Coastal Motorhomes, or input Fiat xxxxxxxx into eBay. You could strike lucky.

If all else fails, I am wondering about wrapping self amalgamating tape round the spigot on the oil cooler.

 

[unclepops]

You were being conservative with the engine size.

When you have obtained the correct part number via ePER, try Coastal Motorhomes, or input Fiat xxxxxxxx into eBay. You could strike lucky.

If all else fails, I am wondering about wrapping self amalgamating tape round the spigot on the oil cooler.

Cheers it's a weird size ie 16mm at the top fitting And 13/14 mm at the oil cooler end I have both sizes of hoses so will probably end up joining with a barbed reducer and self amalgmating tape, trust me I've spent hours searching And can't find one for love or money