Seicento My seicento
- Thread starter scottishseicento
- Start date
Grande Mark
New member
- Joined
- Sep 2, 2011
- Messages
- 97
- Points
- 19
Niceeeee! looks like she is just off the line... and a good well done job. My pal got his 5 series vinyl wrapped in white, and it was rubbish! haha
OP
OP
that looks like a great job, a guy pulled in to my bodyshop guys car park the other week in a DB9 that had been vynal wrapped in white, and he had upgraded red DB9 calipers and 19 inch black alloys, it looked epic lol vynal is the new re-spray!
looks brill mate looks like you have yellow on inside too, looks good!
and butcher, its equally expensive too! place by me wanted £160 just for my bonnet D:
and butcher, its equally expensive too! place by me wanted £160 just for my bonnet D:
Looks cool 
may i be the first to say....
needs lowered...
Have you considered painting the wheels..? Perhaps yellow to match the interior? Sorry no photoshop on this computer or i'd have done a pic
may i be the first to say....
needs lowered...
Have you considered painting the wheels..? Perhaps yellow to match the interior? Sorry no photoshop on this computer or i'd have done a pic
I think the Zender alloys in the classifieds would look amazing on this car
well they would just look awesome on any little car though lol
OP
OP
Slam it, alloys and hids if thats not your plan then ignore this comment and carry on
if thats not your plan then ignore this comment and carry on
tinted rear lenses would look also
also
OP
OP
I've seen the vw g60 steel wheels 6j et35 195/45/15 tyres
only problem is the centre bore being 57.1 where as
fiat is 58.1
Would these fit straight on in place of the abarth wheels if they could be bored out to the correct size?
http://www.ebay.co.uk/itm/GENUINE-VW-CADDY-MK1-MK2-G60-STEEL-WHEELS-TOYOS-/270782567657
only problem is the centre bore being 57.1 where as
fiat is 58.1
Would these fit straight on in place of the abarth wheels if they could be bored out to the correct size?
http://www.ebay.co.uk/itm/GENUINE-VW-CADDY-MK1-MK2-G60-STEEL-WHEELS-TOYOS-/270782567657
This post contains affiliate links which may earn a commission at no additional cost to you.
If you could get them bored out accurately yes, but 15's are a nightmare in terms of arch clearances etc, plenty of threads about it if you do a search
I wouldn't say 15's are a nightmare really, esspecially on a sei, their arches seem to have a bit more space. There's been quite a few cars on 15's now. My cinq has 15's on it, J333EVO ran 15's on the sei 1.4 16v. What i would say though is it kinda kills acceleration completely unless you have the power to overcome the issue. Neither can you lower the car much but it is doable.
OP
OP
Thank's blu thats good info to know about running 15's
I'm on the look out for euro look wheels old skool with a dish wouldn't mind 13 or 14" it's just a case of finding them
I like minilite,ultralite,smoor,minator style they look really classy :slayer:
OP
OP
Slam it, alloys and hids
Hi i love the cades wheels on your sei :slayer:
I have an hid kit fitted that's it in the last two pic's
If you want a dish, and therefore quite wide wheels then i'd go for smaller than 15s. You won't be able to go wide enough to make the dish look any good. 13s are your prob the best bet if you wanna go down the dish route, they will look wider due to the smaller height of the wheel. 14s would allow you to fit PuntoGT brakes though, but you can get UnoT brakes on with 13s. And then go low as you can for the roads in your area and your onto a winner me thinks
Hope that will be of help
C.
Hope that will be of help
C.
Hi i love the cades wheels on your sei :slayer:
I have an hid kit fitted that's it in the last two pic's
ah my bad i thought they were the blue\aqua sidelights ! They 6k? Ive got 15s on and 60mm drop but im not gonna warn you at what ive replaced underneath! Ha' thanks for the compliment !
OP
OP
If you want a dish, and therefore quite wide wheels then i'd go for smaller than 15s. You won't be able to go wide enough to make the dish look any good. 13s are your prob the best bet if you wanna go down the dish route, they will look wider due to the smaller height of the wheel. 14s would allow you to fit PuntoGT brakes though, but you can get UnoT brakes on with 13s. And then go low as you can for the roads in your area and your onto a winner me thinks
Hope that will be of help
C.
Thank's blu,would these fit straight on in place of the
abarth wheels?
https://www.fiatforum.com/classifieds/showproduct.php?product=24216&cat=17
Will prob need spacers but yeah should go on no problem.. Need to find out the ET of the wheels to know what spacers they would need though.
